Category: Lithium complex lubricating greases

    ISO L-X BDIB 2
    DIN 51502:KP 2N–25

It is applied for the lubrication of sliding and roller bearings, in difficult operating conditions, under high loads and low number of revolutions, in conditions of moisture, for wide scope of application in industry and transportation means.
It is also suitable for the lubrication of the equipment during processing of biomass into biofuel - pellets.
Temperature interval of application: from -25°C to + 150°C

Base Li-complex soap, mineral and synthetic oils
Consistency NLGI 2
Dropping point (°C) min 250
Weld load N min 8000
Packing 20kg 180kg

 

Category: Lithium complex lubricating greases

    ISO L-X CDHB 3
    DIN 51502:KP 3N–30

It is applied for the lubrication of sliding and roller bearings, in difficult operating conditions, under high loads and low number of revolutions, in conditions of moisture, for wide scope of application in industry and transportation means.

Temperature interval of application: from -30°C to + 140°C, short-term up to + 220°C.

Base Li-complex soap, mineral oil
Consistency NLGI 3
Dropping point (°C) min 250
Weld load N min 8000
Packing 0.8kg 4kg 20kg 180kg

 

Category: Lithium complex lubricating greases

    ISO L-XCDHB 2
    DIN 51502 : KP 2N –30
    SKF LGWA 2

It is applied for the lubrication of sliding and roller bearings, in difficult operating conditions, under high loads and low number of revolutions, in conditions of moisture, for wide scope of application in industry and transportation means.

Temperature interval of application: from -30°C to + 140°C, short-term up to + 220°C.

Base Li-complex soap, mineral oil
Consistency NLGI 2
Dropping point (°C) min 250
Weld load N min 8000
Packing 0.8kg 4kg 20kg 180kg

 

Category: Lithium complex lubricating greases

    ISO L-XCDHB 2
    DIN 51502 : KP 2 N–30

It is applied for long-term lubrication of roller and sliding bearings in difficult operating conditions, increased loads and small number of revolutions, in moisture conditions and for wide area of application in industry, transportation means, for construction and mining mechanization.

Temperature interval of application: from -30°C to + 140°C.

Base Li-complex soap, mineral oil
Consistency NLGI 2
Dropping point (°C) min 220
Weld load N min 3150
Packing 0.8kg 4kg 20kg 180kg

 

Category: Lithium complex lubricating greases

    ISO L-XCDHB 3
    DIN 51 502:KP 3 N-30

It is applied for long-term lubrication of roller and sliding bearings in difficult operating conditions, increased loads and small number of revolutions, in moisture conditions and for wide area of application in industry, transportation means, for construction and mining mechanization.

Temperature interval of application: from -30°C to + 140°C.

Base Li-complex soap, mineral oil
Consistency NLGI 3
Dropping point (°C) min 220
Weld load N min 3150
Packing 0.8kg 4kg 20kg 180kg