Category: Aluminum complex lubricating greases

    ISO L-XCDIA 2
    DIN 51 502:K 2N-30

It is applied for the lubrication of roller and sliding bearings and other machine assembly blocks in condition of medium speeds, moderate loads and increased operating temperatures under significant influence of moisture, water and water vapour in all industry sectors, primarily in paper and wood industry.

Temperature interval of application: -30°C do +150°C.

Base Al-complex soap, mineral oil
Consistency NLGI 0
Dropping point (°C) min 220
Weld load N min 1600
Packing 20kg 180kg

 

Category: Aluminum complex lubricating greases

    ISO L-X CDIA 1
    DIN 51 502:K 1N-30

It is applied for the lubrication of roller and sliding bearings and other machine assembly blocks in condition of medium speeds, moderate loads and increased operating temperatures under significant influence of moisture, water and water vapour in all industry sectors, primarily in paper and wood industry.

Temperature interval of application: -30°C do +150°C.

Base Al-complex soap, mineral oil
Consistency NLGI 1
Dropping point (°C) min 230
Weld load N min 1600
Packing 20kg 180kg

 

Category: Aluminum complex lubricating greases

    ISO L-XCDIA 2
    DIN 51 502:K 2N-30

It is applied for the lubrication of roller and sliding bearings and other machine assembly blocks in condition of medium speeds, moderate loads and increased operating temperatures under significant influence of moisture, water and water vapour in all industry sectors, primarily in paper and wood industry.

Temperature interval of application: -30°C do +150°C.

Base Al-complex soap, mineral oil
Consistency NLGI 2
Dropping point (°C) min 240
Weld load N min 2000
Packing 20kg 180kg