Category: Special low temperature lubricants

    ISO L-X ECHB 2
    DIN 51 502:KXP 2K-60

Low temperature EP lubricating grease is applied for long-term lubrication of roller and sliding bearings. It is suitable for the lubrication of bearings with high number of revolutions and values of max Dxn factor up to 1 000 000.

Temperature range of from - 60°C to +120°C.

Base Complex thickener, synthetic oil
Consistency NLGI 2
Dropping point (°C) >300
Weld load N min 8000
Packing 0.4kg 0.8kg 20kg

Category: Special low temperature lubricants

    ISO L-XECEA 1
    DIN 51 502:K 1M-60
    FAM IS 01 502

Low temperature lubricating grease is applied for long-term lubrication of roller and sliding bearings in small and medium loads in temperature range from - 60°C to +120°C. It is suitable for the lubrication of bearings with high number of revolutions and values max Dxn factor 1 500 000.

Base Li-soap, mineral oil
Consistency NLGI 1
Dropping point (°C) min 220
Weld load N min 1600
Packing 0.8kg 20kg

Category: Special low temperature lubricants

    ISO L-XEAEA 2
    DIN 51 502:K 2E-50

Low temperature lubricating grease is applied for the lubrication of roller and sliding bearings, small gearings, switches, automatics, instruments and devices that work in extremely low temperatures.

Temperature interval of application: -50°C to +80°C.

Base Li-soap, mineral oil
Consistency NLGI 2
Dropping point (°C) min 180
Weld load N min 1600
Packing 0.8kg 20kg

Category: Special low temperature lubricants

    ISO L-XDAEB 2
    DIN 51 502:KPF 2E-40

Low temperature lubricating grease of special purpose for the lubrication of slideways and sliding surfaces and toothed gearings where there are significantly increased loads.

It is applied in temperatures -40°C to +80°C.

Base Li-soap, mineral oil
Consistency NLGI 2
Dropping point (°C) min 180
Weld load N min 2500
Packing 0.8kg 20kg