Category: Special glass mould lubricants

FAM FSP-21229

Special lubricant of extremely good tackiness for the lubrication of mould in automatic production of hollow glass.

Temperature interval of application: -15°C to +200°C.

Base Organic
Non-working penetration 0.1mm 340-370
Flash point (ºC) min 200
Weld load N min 2000
Packing 180kg

Category: Special high temperature lubricants

    ISO L-XBFIB 2
    DIN 51 502:KPF 2R-25

It is applied for the lubrication of medium loaded and low-speed sliding and roller bearings for operating temperatures up to 180°C, and short-term up to 200°C. Good lubrication effects are achieved for bearings with maximum number of the revolutions n = 800 min-1 and for the value of Dxn = 200 000. It is applied for the lubrication of bearings in non-metal industry, paper industry, leather, wood, textile industry. Lubrication is good even in the presence of wet environment.

Temperature interval of application: -25°C to +180°C.

Base Inorganic/organic thickener, mineral oil
Consistency NLGI 2
Dropping point (°C) >300
Weld load N min 6200
Packing 0.4kg 0.8kg 4kg 20kg 180kg eurocartridge 0,4kg

Category: Special high temperature lubricants

    ISO L-X BFHB 3
    DIN 51502 : KP 3R –25

It is applied for the lubrication of medium loaded sliding and roller bearings for operating temperatures up to 180°C, and short-term up to 200°C. Good effects of lubrication are achieved for bearings with maximum number of the revolutions n = 800 min-1 and for the value of Dxn = 200 000. It is applied for the lubrication of bearings in paper industry, leather, wood, textile, non-metal industry and others.

Base Inorganic/organic thickener, mineral oil
Consistency NLGI 3
Dropping point (°C) >300
Weld load N min 2500
Packing 20kg 180kg

Category: Special high temperature lubricants

    ISO L-X BFHB 2
    DIN 51502 : KP 2R –25

It is applied for the lubrication of medium loaded sliding and roller bearings for operating temperatures up to 180°C, and short-term up to 200°C. Good effects of lubrication are achieved for bearings with maximum number of the revolutions n = 800 min-1 and for the value of Dxn = 200 000. It is applied for the lubrication of bearings in paper industry, leather, wood, textile, non-metal industry and others.

Base Inorganic/organic thickener, mineral oil
Consistency NLGI 2
Dropping point (°C) >300
Weld load N min 2500
Packing 20kg 180kg

Category: Special high temperature lubricants

     ISO L-X BFHB 1
     DIN 51502 : KP 1R –25

It is applied for the lubrication of medium loaded sliding and roller bearings for operating temperatures up to 180°C, and short-term up to 200°C. Good effects of lubrication are achieved for bearings with maximum number of the revolutions n = 800 min-1 and for the value of Dxn = 200 000. It is applied for the lubrication of bearings in paper industry, leather, wood, textile, non-metal industry and others. It is suitable for central lubrication.

Base Inorganic/organic thickener, mineral oil
Consistency NLGI 1
Dropping point (°C) >300
Weld load N min 2500
Packing 20kg 180kg

Category: Special high temperature lubricants

    ISO L-X BFHB 0
    DIN 51502 : KP 0R –25

It is applied for the lubrication of medium loaded sliding and roller bearings for operating temperatures up to 180°C, and short-term up to 200°C. Good effects of lubrication are achieved for bearings with maximum number of the revolutions n = 800 min-1 and for the value of Dxn = 200 000. It is applied for the lubrication of bearings in paper industry, leather, wood, textile, non-metal industry and others. It is suitable for central lubrication.

Base Inorganic/organic thickener, mineral oil
Consistency NLGI 0
Dropping point (°C) >300
Weld load N min 2500
Packing 20kg 180kg

Category: Special high temperature lubricants

    ISO L-X BFHB 2
    DIN 51502 : KP 2R –25

Is primarily applied for the lubrication of equipment during processing of biomass into biofuel-pellets. It is applied for the lubrication of loaded sliding and roller bearings for operating temperatures up to 180°C, and short-term up to 200°C . It is suitable for the lubrication in wet environment, for the lubrication of bearings in paper industry, leather, wood, textile, non-metal industry and other.

Base Inorganic/organic thickener, mineral oil
Consistency NLGI 2
Dropping point (°C) >300
Weld load N min 6200
Packing 20kg 180kg

Category: Special high temperature lubricants

    ISO L-X BFHB 1
    DIN 51502 : KP 1R –25

Is primarily applied for the lubrication of equipment during processing of biomass into biofuel-pellets. It is applied for the lubrication of loaded sliding and roller bearings for operating temperatures up to 180°C, and short-term up to 200°C . It is suitable for the lubrication in wet environment, for the lubrication of bearings in paper industry, leather, wood, textile, non-metal industry and other.

Base Inorganic/organic thickener, mineral oil
Consistency NLGI 1
Dropping point (°C) >300
Weld load N min 6200
Packing 20kg 180kg

Category: Special high temperature lubricants

    ISO L-XBGIB 2
    DIN 51 502:KEPF 2T-25

It i s applied for long-term lubrication of highly loaded sliding and roller bearings for operating temperatures up to 220°C, and short-term up to 250°C. Good lubrication effects are achieved for the bearings with maximum number of revolutions n =1500 min-1 and for the values of Dxn =350 000. It is applied for the lubrications of bearings of textile machines, plastics processing machines, bakery ovens, lacquering devices, baking ovens in ceramic non-metal industry. Lubrication is also good in the presence of wet environment, weak alkali and weak acid environment.

Temperature interval of application: -25°C to +220°C.

Base Synthetic thickener, synthetic oil
Consistency NLGI 2
Dropping point (°C) >300
Weld load N min 2500
Packing 0.8kg 4kg 20kg