Category: Special lubricants for manual tool reducers

    ISO L-XCCEB 0
    DIN 51 502:KP 0K-30
    FAM IS 01 402

Lubricating grease has special application for the lubrication of bearings and reducer gearings on manual electric grinders, saws and drills.

Temperature interval of application: -30°C to +120°C.

Base Li-soap, mineral oil
Consistency NLGI 0
Dropping point (°C) min 175
Weld load N min 8000
Packing 0.8kg

Category: Special lubricants for manual tool reducers

    ISO L-XCDEB 000
    ISO L-CKT
    DIN 51 502:KPF 000N -30

Lubricating grease specially intended for the lubrication of reducer transmisions, bearings and sliding surfaces on manual vibratory drills, impact hammers and grinders. They are also recommended for central lubrication.

Temperature interval of application: -30°C to +140°C.

Base Li-soap, mineral oil, solid additives
Consistency NLGI 000
Dropping point (°C) min 150
Weld load N min 5000
Packing 0.8 kg

Category: Special lubricants for manual tool reducers

    ISO L-XCDEB 00
    ISO L-CKT
    DIN 51502:KPF 00N-30

Lubricating grease specially intended for the lubrication of reducer transmisions, bearings and sliding surfaces on manual vibratory drills, impact hammers and grinders. They are also recommended for central lubrication.

Temperature interval of application: -30°C to +140°C.

Base Li-soap, mineral oil, solid additives
Consistency NLGI 00
Dropping point (°C) min 160
Weld load N min 5000
Packing 0.8 kg

Category: Special lubricants for manual tool reducers

    ISO L-XCDEB 0
    ISO L-CKT
    DIN 51 502:KPF 0N-30

Lubricating grease specially intended for the lubrication of reducer transmisions, bearings and sliding surfaces on manual vibratory drills, impact hammers and grinders. They are also recommended for central lubrication.

Temperature interval of application: -30°C to +140°C.

Base Li-soap, mineral oil, solid additives
Consistency NLGI 0
Dropping point (°C) min 160
Weld load N min 5000
Packing 0.8kg