Category: Special lubricants for open and closed gears and steel ropes

    ISO L -CKT/CKL

Semi-fluid lubricant primarily intended for the lubrication of closed reducer gearing by immersion procedure. It is applied in cement industry, mining, construction industry, steel works, non-metal industry, rubber and other industries, for the lubrication of toothed gearings that work under extremely high, uneven loading and impacts.

Temperature interval of application: -20°C to + 120°C.

Base Soap thickener, mineral oil
Brookfield viscosity, mPa.s 30000
Flash point (ºC) min 200
Weld load N min 5000
Packing 20kg 180kg

Category: Special lubricants for open and closed gears and steel ropes

    ISO L-CKT/CKL

It is applied for the lubrication of closed and open loaded toothed and chain gearings exposed to high pressures and impact loads in all industrial areas for long-term lubrication. It is also applied for the lubrication of steel ropes.

Temperature interval of application: -20°C to +120°C.

Base Soap thickener, mineral oil
Brookfield viscosity, mPa.s 18000
Flash point (ºC) min 200
Weld load N min 3150
Packing 20kg 180kg

Category: Special lubricants for open and closed gears and steel ropes

    ISO L-CKM

It is primarily intended for the lubrication of steel ropes exposed to atmospheric influence of water, moisture, base and acidic solutions on equipment such as: excavators on surface mining, ropeways, bridge cranes, technological machines in chemical and paper industry and other industries. It can also be applied for the lubrication of open toothed and chain gearings.

Temperature interval of application: -20°C to +120°C.

Base Soap thickener, mineral oil
Brookfield viscosity, mPa.s 70000
Flash point (ºC) min 200
Weld load N min 2500
Packing 20kg 180kg