SG 16 EP

Category: Products for machining - inactive non-emulsifying

    ISO-L-MHE
    SRPS B.H3.526
    FAM IS 03 052

Inactive, mineral base cutting oil. It is used for cooling and lubrication in the processing of all difficult-to-process steels (for improvement, cementing, tool, fire-resistant), non-ferrous metals and their alloys, by cutting, characterized by extremely difficult processing conditions. It is particularly suitable for the processing of construction carbon steels, not thermally processed, which during cutting process have unfavourable chips form.

Viscosity at 40 ºC (mm²/s) 42
Density at 20 ºC (g/mL) 0.890
Flash point (ºC) min 185
Packing 20kg 180kg

SG 32 N EKO

Category: Products for machining - inactive non-emulsifying

    ISO-L-MHE
    SRPS B.H3.526
    FAM IS 03 052

Inactive, mineral base cutting oil. It is used for cooling and lubrication in the processing of all difficult-to-process steels, non-ferrous metals and their alloys. It is successfully used in processing of gears, splined shafts and screw threads by gear hobbing procedure, in copying milling, profile grinding.

Viscosity at 40 ºC (mm²/s) 32
Density at 20 ºC (g/mL) 0.880
Flash point (ºC) min 185
Packing 20kg 180kg

SG 42

Category: Products for machining - inactive non-emulsifying

    ISO-L-MHE
    SRPS B.H3.526
    FAM IS 03 052

Inactive, mineral base cutting oil. It is used for cooling and lubrication in the processing by cutting of steel, grey iron, light and non-ferrous metals and their alloys.

Viscosity at 40 ºC (mm²/s) 35
Density at 20 ºC (g/mL) 0.880
Flash point (ºC) min 185
Packing 20kg 180kg

SG 42 K

Category: Products for machining - inactive non-emulsifying

    ISO-L-MHE
    SRPS B.H3.526
    FAM IS 03 052

Inactive, mineral base cutting oil. It is used for cooling and lubrication in the processing by cutting of steel, grey iron, light and non-ferrous metals and their alloys.

Viscosity at 40 ºC (mm²/s) 18
Density at 20 ºC (g/mL) 0.870
Flash point (ºC) min 185
Packing 20kg 180kg

SG BPP

Category: Products for machining - inactive non-emulsifying

    ISO-L-MHE
    SRPS B.H.526
    FAM IS 03 052

Inactive, mineral base cutting oil with increased content of additives and fatty component. It is used for very rigorous hard steel grinding operations, such as full profile grinding.

Viscosity at 40 ºC (mm²/s) 34
Density at 20 ºC (g/mL) 0.860
Flash point (ºC) 210
Packing 180kg

SBLm-K

Category: Products for machining - inactive non-emulsifying

    ISO-L-MHE
    SRPS B.H3.526
    FAM IS 03 308

Inactive, mineral base cutting oil. It is used for cooling and lubrication in medium machining modes of light and non-ferrous metals and their alloys, steel, grey iron and malleable cast iron. Due to good property of chips removal from the cutting zone, it is very suitable for the operations of drilling small diameter, big depth holes.

Viscosity at 40 ºC (mm²/s) 10
Density at 20 ºC (g/mL) 0.890
Flash point (ºC) 140
Packing 180kg

HSF 71 S

Category: Products for machining - inactive non-emulsifying

    ISO-L-MHE
    FAM IS 03 302

Inactive, mineral base cutting oil with added fatty component. It is used for cooling and lubrication in processing of steel, grey iron, light and non-ferrous metals by honing, finishing and superfinishing operations in medium machining modes.

Viscosity at 40 ºC (mm²/s) 7.3
Density at 20 ºC (g/mL) 0.870
Flash point (ºC) min 85
Packing 180kg

HSF 81 L

Category: Products for machining - inactive non-emulsifying

    ISO-L-MHE
    FAM IS 03 309

Inactive, mineral base cutting oil with added fatty component. It is used for cooling and lubrication in processing of steel, grey iron, light and non-ferrous metals by honing, finishing and superfinishing operations in severe machining modes.

Viscosity at 40 ºC (mm²/s) 4. 5
Density at 20 ºC (g/mL) 0.840
Flash point (ºC) min 110
Packing 180kg

HP 515

Category: Products for machining - inactive non-emulsifying

    ISO-L-MHE
    SRPS B.H3.526
    FAM IS 03 307

Inactive, mineral base cutting oil. It is used for cooling and lubrication in processing of alloyed and stainless steels, light and non-ferrous metals, non-ferrous metal alloys by operations of horizontal profile broaching in medium and difficult machining modes.

Viscosity at 40 ºC (mm²/s) 45
Density at 20 ºC (g/mL) 0.920
Flash point (ºC) min 190
Packing 180kg

Joomla! Debug конзола

Сесија

Информација за профил

Искористеност на меморија

Барања до базата