Category: Oils for tractor engine, transmission and hydraulics

ISO L-C/H; API GL-4
Case New Holland CNH MAT3535/3505
CASE MS 1207/1206
FNHA-2-C-201.00 
Ford New Holland M2C-134D
John Deere JDM J20C
Massey Ferguson CMS M1141/1143/1145

FAM TRAKTOL BIO is biodegradable tractor oil (UTTO) which is used for lubrication, power transmission and cooling where transmission and hydraulic system are lubricated with the same oil. This oil can be used as hydraulic-transmission oil for agricultural and construction machinery, in transmissions, differentials, driving axles power transmissions to drive auxiliary machines, for planetary gear units and so on. It can not be used as engine oil.

Viscosity at 40 °C (mm²/s) 47.0
Viscosity at 100 °C (mm²/s) 11.2
Flash point (°C) 232
Pour point (°C) -40
Packing 10L 180kg

 

Category: Oils for tractor engine, transmission and hydraulics

    ISO L-C
    Caterpillar TO-4
    Kamatsu (KES 07.868.1)
    ZF TE-ML 1

TRANSHIDO TO-4 oils are recommended for transmission system, rear drive and wet brakes for heavy duty Caterpillar cargo vehicles and equipment or any other equipment for which the lubricant with TO-4  performance level is recommended it is not recommended for engine lubrication). TRANSHIDO TO-4 oils are particularly suitable for hydraulic system on Caterpillar and Allison equipment for heavy duty operating conditions.

Viscosity at 40 °C (mm²/s) 252
Viscosity at 100 °C (mm²/s) 19.6
Flash point (°C) 260
Pour point (°C) -18
Packing 0.25L 0.5L 180kg

 

Category: Oils for tractor engine, transmission and hydraulics

ISO L-C; Caterpillar TO-4
Allison C-4
Kamatsu (KES 07.868.1)
ZF TE-ML 3; ZF TE-ML 1

Approvals: ZF

TRANSHIDO TO-4 oils are recommended for transmission system, rear drive and wet brakes for heavy duty Caterpillar cargo vehicles and equipment or any other equipment for which the lubricant with TO-4 performance level is recommended (it is not recommended for engine lubrication). TRANSHIDO TO-4 oils are particularly suitable for hydraulic system on Caterpillar and Allison equipment for heavy duty operating conditions.

Viscosity at 40 °C (mm²/s) 100
Viscosity at 100 °C (mm²/s) 11.5
Flash point (°C) 245
Pour point (°C) -27
Packing 20L 180kg

 

Category: Oils for tractor engine, transmission and hydraulics

ISO L-C; Caterpillar TO-4
Allison C-4
Kamatsu (KES 07.868.1)
ZF TE-ML 3; ZF TE-ML 1

Approvals: ZF

TRANSHIDO TO-4 oils are recommended for transmission system, rear drive and wet brakes for heavy duty Caterpillar cargo vehicles and equipment or any other equipment for which the lubricant with TO-4 performance level is recommended (it is not recommended for engine lubrication). TRANSHIDO TO-4 oils are particularly suitable for hydraulic system on Caterpillar and Allison equipment for heavy duty operating conditions.

Viscosity at 40 °C (mm²/s) 30
Viscosity at 100 °C (mm²/s) 5.5
Flash point (°C) 210
Pour point (°C) -39
Packing 20L 180kg

 

Category: Oils for tractor engine, transmission and hydraulics

    ISO L-C/H; API GL-4
    Massey Ferguson CMS M1135/41/43
    FORD M2C 134-D
    FORD M2C 86-C
    John Deere JDM J 20C/20D; GM Allison-4; AGCO 821-XL

High quality tractor oil (UTTO) for the lubrication, power transmission and cooling of tractors where transmission and hydraulic system are lubricated with the same oil. This oil can be used as hydraulic transmission oil for agricultural and construction machinery for transmissions, differentials, driving axles, power gearings for connection machines, for planetary reducers, wet brakes, etc. It is recommended for tractors of the following producers: UNIVERSAL, VOLVO BM, ZETOR, SCHLUTER, FENDT, LANDINI, IMT, STEYR DAIMLER PUCH, FIAT, BELARUS, URSUS...

Viscosity at 100 °C (mm²/s) 80
IV 9.0
Flash point (°C) 225
Pour point (°C) -27
Packing 5L 10L 60L 180kg

 

Category: Oils for tractor engine, transmission and hydraulics

    ISO L-C/H; API GL-4

Supreme quality oil of mineral base (UTTO) for the lubrication, power transmission and cooling of transmission, differentials, planetary reducers, driving axles, hydraulic installations and wet brakes of recently produced tractors, agricultural, construction and mining machines and industrial equipment where the application of this quality oil is foreseen. It is not recommended for the lubrication of tractor engines with internal combustion.

Viscosity at 40 °C (mm²/s) 80
Viscosity at 100 °C (mm²/s) 11.0
Flash point (°C) 225
Pour point (°C) -27
Packing 5L 10L 60L 180kg

 

Category: Oils for tractor engine, transmission and hydraulics

    ISO L-C/H; API GL-4

Supreme oil (UTTO) of mineral base for the lubrication, power transmission and cooling of transmissions, differentials, planetary reducers, driving axles, hydraulic installations and wet brakes in recently-produced tractors, agricultural, construction and mining machinery and industrial equipment where producer recommends the use of this quality level oil. It is not recommended for the lubrication of tractor internal combustion engines.

Viscosity at 40 °C (mm²/s) 80
Viscosity at 100 °C (mm²/s) 9.2
Flash point (°C) 225
Pour point (°C) -27
Packing 10L 20L 60L 205L

 

Category: Oils for tractor engine, transmission and hydraulics

    ISO L-C/H; API GL-4

Supreme multipurpose oil (UTTO) of mineral base for the lubrication of hydraulics and transmission, as well as for cooling of wet brakes in all types of modern tractors, other agricultural and construction machinery where producer recommends the use of universal lubricant for the assembly blocks mentioned above.

 

Viscosity at 40 °C (mm²/s) 80
Viscosity at 100 °C (mm²/s) 11.2
Flash point (°C) 225
Pour point (°C) -27
Packing 5L 10L 180kg

Category: Oils for tractor engine, transmission and hydraulics

    ISO L-E/C/H
    API CF-4/SF
    ACEA E2
    MB 227.1/ 228.1
    MIL-L-2104D
    John Deere JDM J27
    Massey Ferguson CMS M1139/M1144/M1145
    FORD M2C 159B
    API GL-4
    Allison C-4
    ZF TE-ML 06B, 06D, 07B
    Caterpillar TO-2

Supreme quality universal oil of mineral base (STOU) specially developed for the application in agricultural mechanization for the lubrication of diesel and gasoline engines with and without turbocharger, in gear-box, transmission, hydraulic devices, wet brakes etc in tractors and combines - for engine, in older generation passenger vehicles - for engine, transmission (API GL 4), differential, in trucks - for engine, transmission, differential etc. It is also used in other agricultural, construction, mining machinery and industrial equipment. With application of this oil, the number of oils necessary for lubrication is reduced.

Viscosity at 40 °C (mm²/s) 81
Viscosity at 100 °C (mm²/s) 11
Flash point (°C) 220
Pour point (°C) -33
Packing 5L 10L 180kg