Category: Brake fluids

FM VSS 116 DOT 5.1
SAE J 1704; SRPS H.Z2. 100 tip 3

Synthetic fluid used for the filling of hydraulic brake system and hydraulic clutches with discs or drums, produced of mixture of polyglycol and antirust and anticorrosion additive. It should not be used in brake systems where the manufacturer recommended use of mineral base fluids.

Viscosity at -40 °C (mm²/s) max 900
Viscosity at 100°C (mm²/s) min 1.5
Wet boiling point min 180
Boiling point min 180
Packing 0.5L 210kg

Category: Brake fluids

    SRPS H.Z2. 100 type 2
    ISO 4925 Class 4; FM VSS 116 DOT 4 
    SAE J 1703; SAE J 1704; SRPS H.Z2. 100 type 2
    as well as requirements of world motor vehicle manufacturers

Synthetic fluid used for the filling of hydraulic brake system and hydraulic clutches with discs or drums, produced of mixture of polyglycol and antirust and anticorrosion additive. It very difficultly absorbs moisture from the air, therefore it has very high boiling point which prevents creation of steam plugs, which provides safe braking and prolongs life even in the most difficult exploitation conditions. It should not be used in brake systems where the manufacturer recommended use of mineral base fluids.

Viscosity at -40 °C (mm²/s) max 1500
Viscosity at 100 °C (mm²/s) min 1.5
Wet boiling point  (°C) min 165
Boiling point (°C) min 250
Packing 0.25L 0.5L 210kg

Category: Brake fluids

    SRPS H.Z2. 100 type 1
    ISO 4952 Class 3; FM VSS 116 DOT 3;
    SAE J 1703; Fiat 9.55597
    SRPS H.Z2. 100 type 1 as well as requirements of world motor vehicle manufacturers

Synthetic fluid used for the filling of hydraulic brake system mechanisms and hydraulic clutch controls. It should not be used in brake systems for which the manufacturer recommended use of mineral base hydraulic fluids.

 

Viscosity at -40 °C (mm²/s) max 1500
Viscosity at 100 °C (mm²/s) min 1.5
Wet boiling point (°C) min 140
Boiling point (°C) min 230
Packing 0.25L 0.5L 210kg