- Детали
-
Објавено: Понеделник, 28 Март 2016 18:03
-
Напишано од Bodal
Category: Slideway oils
ISO-L-HG
ISO 11158 HG
Cincinnati Milacron P50
Oils used for the lubrication of slideways and guides. They are produced from highly refined base oils of paraffin base and especially selected additives that comply with the most severe application requirements in conditions of low speeds and high loads, without the appearance of STICK-SLIP. Lower grades (32, 68) are used for the lubrication of slideways and hydraulics in combined systems. Higher grades (100, 150, 220) are used for the lubrication of slideways for medium and highest loads.
Viscosity at 40 °C (mm²/s) |
220 |
Viscosity at 100 ºC (mm²/s) |
20.0 |
Flash point (°C) |
235 |
Pour point (°C) |
-12 |
Packing |
20L 180kg |
- Детали
-
Објавено: Понеделник, 28 Март 2016 18:01
-
Напишано од Bodal
Category: Slideway oils
ISO-L-HG
ISO 11158 HG
Oils used for the lubrication of slideways and guides. They are produced from highly refined base oils of paraffin base and especially selected additives that comply with the most severe application requirements in conditions of low speeds and high loads, without the appearance of STICK-SLIP. Lower grades (32, 68) are used for the lubrication of slideways and hydraulics in combined systems. Higher grades (100, 150, 220) are used for the lubrication of slideways for medium and highest loads.
Viscosity at 40 °C (mm²/s) |
150 |
Viscosity at 100 ºC (mm²/s) |
14.5 |
Flash point (°C) |
225 |
Pour point (°C) |
-12 |
Packing |
20L 180kg |
- Детали
-
Објавено: Понеделник, 28 Март 2016 17:56
-
Напишано од Bodal
Category: Slideway oils
ISO-L-HG
ISO 11158 HG
Oils used for the lubrication of slideways and guides. They are produced from highly refined base oils of paraffin base and especially selected additives that comply with the most severe application requirements in conditions of low speeds and high loads, without the appearance of STICK-SLIP. Lower grades (32, 68) are used for the lubrication of slideways and hydraulics in combined systems. Higher grades (100, 150, 220) are used for the lubrication of slideways for medium and highest loads.
Viscosity at 40 °C (mm²/s) |
100 |
Viscosity at 100 ºC (mm²/s) |
11.0 |
Flash point (°C) |
220 |
Pour point (°C) |
-15 |
Packing |
20L 180kg |
- Детали
-
Објавено: Понеделник, 28 Март 2016 17:55
-
Напишано од Bodal
Category: Slideway oils
ISO-L-HG
ISO 11158 HG
Cincinnati Milacron P47
Oils used for the lubrication of slideways and guides. They are produced from highly refined base oils of paraffin base and especially selected additives that comply with the most severe application requirements in conditions of low speeds and high loads, without the appearance of STICK-SLIP. Lower grades (32, 68) are used for the lubrication of slideways and hydraulics in combined systems. Higher grades (100, 150, 220) are used for the lubrication of slideways for medium and highest loads.
Viscosity at 40 °C (mm²/s) |
68 |
Viscosity at 100 ºC (mm²/s) |
9.3 |
Flash point (°C) |
220 |
Pour point (°C) |
-18 |
Packing |
20L 180kg |
- Детали
-
Објавено: Понеделник, 28 Март 2016 17:54
-
Напишано од Bodal
Category: Slideway oils
ISO-L-HG
ISO 11158 HG
Cincinnati Milacron P53
Oils used for the lubrication of slideways and guides. They are produced from highly refined base oils of paraffin base and especially selected additives that comply with the most severe application requirements in conditions of low speeds and high loads, without the appearance of STICK-SLIP. Lower grades (32, 68) are used for the lubrication of slideways and hydraulics in combined systems. Higher grades (100, 150, 220) are used for the lubrication of slideways for medium and highest loads.
Viscosity at 40 °C (mm²/s) |
32 |
Viscosity at 100 ºC (mm²/s) |
5.9 |
Flash point (°C) |
200 |
Pour point (°C) |
-24 |
Packing |
20L 180kg |