Category: Circulating oils

    ISO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAM CIRKOL® 3 is used for lubrication of slightly loaded high speed rolling and sliding bearings and spindle gear trains. The application of lubrication in circulation systems with the spindle sander, high speed machine tools, centrifuges, light textile machines, spinning machines and the like. Attribute this oil that easily extracts the air, not a penny and quickly separates the water.

Kinematic viscosity at 40 ° C (mm² / s) 3.02
Kinematic viscosity at 100 ° C (mm² / s) -
Flash point (°C) 120
Density at 15 ° C 0.8300
Packing 20L 180kg

Category: Circulating oils

    ISO L-HL
    ISO 11158 (HL)
    DIN 51 524 part 1 (HL)
    DIN 51 517 part 2 (CL)

FAMCIRKOL ML are specially developed oils for MORGAN constructions of roller bearings requiring «Super demulsibility». These oils are recommended for circulating systems where there is significant problem of contamination of the system with water, such as roller bearings in steel sheet rolling mills and non-ferrous metal sheets; big low-speed gears in mixers and mills. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 680
Viscosity at 100 ºC (mm²/s) 36
Flash point (°C) 265
Pour point (°C) -6
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL

Process oil used for calanders and rubber mixture.

Viscosity at 40 °C (mm²/s) 320
Viscosity at 100 ºC (mm²/s) 23.5
Flash point (°C) 245
Pour point (°C) -12
Packing 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11158 (HL)
    DIN 51 524 part 1 (HL)
    DIN 51 517 part 2 (CL)

FAMCIRKOL ML are specially developed oils for MORGAN constructions of roller bearings requiring «Super demulsibility». These oils are recommended for circulating systems where there is significant problem of contamination of the system with water, such as roller bearings in steel sheet rolling mills and non-ferrous metal sheets; big low-speed gears in mixers and mills. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 460
Viscosity at 100 ºC (mm²/s) 30
Flash point (°C) 260
Pour point (°C) -9
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11158 (HL)
    DIN 51 524 deo 1 (HL)
    DIN 51 517 deo 2 (CL)

FAMCIRKOL ML are specially developed oils for MORGAN constructions of roller bearings requiring «Super demulsibility». These oils are recommended for circulating systems where there is significant problem of contamination of the system with water, such as roller bearings in steel sheet rolling mills and non-ferrous metal sheets; big low-speed gears in mixers and mills. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 320
Viscosity at 100 ºC (mm²/s) 23.5
Flash point (°C) 245
Pour point (°C) -12
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11158 (HL)
    DIN 51 524 deo 1 (HL)
    DIN 51 517 deo 2 (CL)

FAMCIRKOL ML are specially developed oils for MORGAN constructions of roller bearings requiring «Super demulsibility». These oils are recommended for circulating systems where there is significant problem of contamination of the system with water, such as roller bearings in steel sheet rolling mills and non-ferrous metal sheets; big low-speed gears in mixers and mills. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 220
Viscosity at 100 ºC (mm²/s) 18.5
Flash point (°C) 240
Pour point (°C) -15
Packing 20L 180kg

Category: Circulating oils

    ISO L-HL
    ISO 11158 (HL)
    DIN 51 524 deo 1 (HL)
    DIN 51 517 deo 2 (CL)

FAMCIRKOL ML are specially developed oils for MORGAN constructions of roller bearings requiring «Super demulsibility». These oils are recommended for circulating systems where there is significant problem of contamination of the system with water, such as roller bearings in steel sheet rolling mills and non-ferrous metal sheets; big low-speed gears in mixers and mills. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 150
Viscosity at 100 ºC (mm²/s) 14.3
Flash point (°C) 230
Pour point (°C) -18
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11158 (HL)
    DIN 51 524 deo 1 (HL)
    DIN 51 517 deo 2 (CL)

FAMCIRKOL ML are specially developed oils for MORGAN constructions of roller bearings requiring «Super demulsibility». These oils are recommended for circulating systems where there is significant problem of contamination of the system with water, such as roller bearings in steel sheet rolling mills and non-ferrous metal sheets; big low-speed gears in mixers and mills. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 100
Viscosity at 100 ºC (mm²/s) 11
Flash point (°C) 220
Pour point (°C) -18
Packing 20L 180kg

 

Category: Circulating oils

    SO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAMCIRKOL are multipurpose oils for the lubrication of all assembly blocks of the machines and devices that do not require oils with significant EP properties in circulating and central systems. Lower viscosity grades are intended for the lubrication and cooling of high speed spindles, precision grinding machines and spindles in textile industry. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 680
Viscosity at 100 ºC (mm²/s) 36
Flash point (°C) 265
Pour point (°C) -6
Packing 20L 180kg

Category: Circulating oils

    ISO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAMCIRKOL are multipurpose oils for the lubrication of all assembly blocks of the machines and devices that do not require oils with significant EP properties in circulating and central systems. Lower viscosity grades are intended for the lubrication and cooling of high speed spindles, precision grinding machines and spindles in textile industry. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 460
Viscosity at 100 ºC (mm²/s) 30
Flash point (°C) 260
Pour point (°C) -9
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAMCIRKOL su višenamenska ulja za podmazivanje svih sklopova mašina i uređaja koji ne zahtevaju ulja sa izraženim EP osobinama u cirkulacionim i centralnim sistemima. Niže gradacije viskoznosti namenjene su za podmazivanje i hlađenje brzohodnih vretena, preciznih brusilica i vretena u tekstilnoj industriji. Više gradacije viskoznosti primenjuju se za cirkulacione sisteme podmazivanja lako do srednje opterećenih zupčastih prenosa i ležajeva, kod normalnih i srednje povišenih radnih temperatura u industriji, gde se ne zahtevaju ulja sa EP svojstvima.

Viscosity at 40 °C (mm²/s) 320
Viscosity at 100 ºC (mm²/s) 23.5
Flash point (°C) 245
Pour point (°C) -12
Packing 20L 180kg

Category: Circulating oils

ISO L-HL
ISO 11 158 (HL)
DIN 51 524 deo 1 (HL)

FAMCIRKOL are multipurpose oils for the lubrication of all assembly blocks of the machines and devices that do not require oils with significant EP properties in circulating and central systems. Lower viscosity grades are intended for the lubrication and cooling of high speed spindles, precision grinding machines and spindles in textile industry. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 220
Viscosity at 100 ºC (mm²/s) 18.5
Flash point (°C) 240
Pour point (°C) -15
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAMCIRKOL are multipurpose oils for the lubrication of all assembly blocks of the machines and devices that do not require oils with significant EP properties in circulating and central systems. Lower viscosity grades are intended for the lubrication and cooling of high speed spindles, precision grinding machines and spindles in textile industry. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 150
Viscosity at 100 ºC (mm²/s) 14.3
Flash point (°C) 230
Pour point (°C) -18
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAMCIRKOL are multipurpose oils for the lubrication of all assembly blocks of the machines and devices that do not require oils with significant EP properties in circulating and central systems. Lower viscosity grades are intended for the lubrication and cooling of high speed spindles, precision grinding machines and spindles in textile industry. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 100
Viscosity at 100 ºC (mm²/s) 11
Flash point (°C) 220
Pour point (°C) -18
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAMCIRKOL are multipurpose oils for the lubrication of all assembly blocks of the machines and devices that do not require oils with significant EP properties in circulating and central systems. Lower viscosity grades are intended for the lubrication and cooling of high speed spindles, precision grinding machines and spindles in textile industry. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 68
Viscosity at 100 ºC (mm²/s) 8.6
Flash point (°C) 220
Pour point (°C) -21
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAMCIRKOL are multipurpose oils for the lubrication of all assembly blocks of the machines and devices that do not require oils with significant EP properties in circulating and central systems. Lower viscosity grades are intended for the lubrication and cooling of high speed spindles, precision grinding machines and spindles in textile industry. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 46
Viscosity at 100 ºC (mm²/s) 6.7
Flash point (°C) 215
Pour point (°C) -21
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAMCIRKOL are multipurpose oils for the lubrication of all assembly blocks of the machines and devices that do not require oils with significant EP properties in circulating and central systems. Lower viscosity grades are intended for the lubrication and cooling of high speed spindles, precision grinding machines and spindles in textile industry. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 32
Viscosity at 100 ºC (mm²/s) 5.4
Flash point (°C) 210
Pour point (°C) -24
Packing 20L 180kg

 

Category: Circulating oils

    ISO L-HL
    ISO 11 158 (HL)
    DIN 51 524 deo 1 (HL)

FAMCIRKOL are multipurpose oils for the lubrication of all assembly blocks of the machines and devices that do not require oils with significant EP properties in circulating and central systems. Lower viscosity grades are intended for the lubrication and cooling of high speed spindles, precision grinding machines and spindles in textile industry. Higher viscosity grades are applied for circulating lubrication systems of light to medium loaded gear transmissions and bearings, in normal and medium increased operating temperatures in industry, where oils with EP properties are not required.

Viscosity at 40 °C (mm²/s) 22
Viscosity at 100 ºC (mm²/s) 4.3
Flash point (°C) 220
Pour point (°C) -24
Packing 20L 180kg