Category: Hydraulic fluids

    ISO L-HM; ISO 11 158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1/HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S
    SIS SS 155434; AIST 127.136; VDMA 24318

FAMHIDO ZINC FREE HD oils are produced from solvent neutral base oils and additives ashless (zinc-free).

FAMHIDO ZINC FREE HD are multipurpose oils which are used as a hydraulic fluid power and motion in all types of hydraulic systems in normal operating temperatures, as well as for the lubrication of bearings, gears and other components in various circulation systems requiring ashless oil.

Viscosity at 40 °C (mm²/s) 100
Viscosity at 100 ºC (mm²/s) 11.0
Flash point (°C) 220
Pour point (°C) -21
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11 158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1/HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S
    SIS SS 155434; AIST 127.136; VDMA 24318

FAMHIDO ZINC FREE HD oils are produced from solvent neutral base oils and additives ashless (zinc-free).

FAMHIDO ZINC FREE HD are multipurpose oils which are used as a hydraulic fluid power and motion in all types of hydraulic systems in normal operating temperatures, as well as for the lubrication of bearings, gears and other components in various circulation systems requiring ashless oil.

Viscosity at 40 °C (mm²/s) 68
Viscosity at 100 ºC (mm²/s) 9.0
Flash point (°C) 220
Pour point (°C) -21
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11 158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1/HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S
    SIS SS 155434; AIST 127.136; VDMA 24318

FAMHIDO ZINC FREE HD oils are produced from solvent neutral base oils and additives ashless (zinc-free).

FAMHIDO ZINC FREE HD are multipurpose oils which are used as a hydraulic fluid power and motion in all types of hydraulic systems in normal operating temperatures, as well as for the lubrication of bearings, gears and other components in various circulation systems requiring ashless oil.

Viscosity at 40 °C (mm²/s) 46
Viscosity at 100 ºC (mm²/s) 7.0
Flash point (°C) 210
Pour point (°C) -24
Packing 5L 10L 20L 60L 180kg

Category: Hydraulic fluids

    ISO L-HM; ISO 11 158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1/HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S
    SIS SS 155434; AIST 127.136; VDMA 24318

FAMHIDO ZINC FREE HD oils are produced from solvent neutral base oils and additives ashless (zinc-free).

FAMHIDO ZINC FREE HD are multipurpose oils which are used as a hydraulic fluid power and motion in all types of hydraulic systems in normal operating temperatures, as well as for the lubrication of bearings, gears and other components in various circulation systems requiring ashless oil.

Viscosity at 40 °C (mm²/s) 32
Viscosity at 100 ºC (mm²/s) 5.5
Flash point (°C) 200
Pour point (°C) -27
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11 158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1/HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S
    SIS SS 155434; AIST 127.136; VDMA 24318

FAMHIDO ZINC FREE HD oils are produced from solvent neutral base oils and additives ashless (zinc-free).

FAMHIDO ZINC FREE HD are multipurpose oils which are used as a hydraulic fluid power and motion in all types of hydraulic systems in normal operating temperatures, as well as for the lubrication of bearings, gears and other components in various circulation systems requiring ashless oil.

Viscosity at 40 °C (mm²/s) 22
Viscosity at 100 ºC (mm²/s) 4.3
Flash point (°C) 190
Pour point (°C) -27
Pakovanje 5L 10L 20L 180kg

Category: Hydraulic fluids

    VOITH 3.90-8

It is specially developed oil for turbo couplings type R, S, TP, T. It is recommended for all hydrodynamic systems with or without gears as well as for hydraulic systems where improved EP properties are required.

Viscosity at 40 °C (mm²/s) 32
Viscosity at 100 ºC (mm²/s) 5.3
Flash point (°C) 215
Pour point (°C) -24
Packing 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11 158 HM
    DIN 51524/2
    Vickers 35VQ25

HIDO C oils are HLP-D oils specially formulated for Caterpillar hydraulic and hydrostatic systems. These oils are also recommended for hydraulic systems of other manufacturers, requiring hydraulic oils that meet requirements of test Vickers 35VQ25.

Viscosity at 40 °C (mm²/s) 95
Viscosity at 100 ºC (mm²/s) 11
Flash point (°C) 225
Pour point (°C) -27
Packing 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11 158 HM
    DIN 51524/2
    Vickers 35VQ25

HIDO C oils are HLP-D oils specially formulated for Caterpillar hydraulic and hydrostatic systems. These oils are also recommended for hydraulic systems of other manufacturers, requiring hydraulic oils that meet requirements of test Vickers 35VQ25.

Viscosity at 40 °C (mm²/s) 26
Viscosity at 100 ºC (mm²/s) 4.5
Flash point (°C) 200
Pour point (°C) -30
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO 11158 HV
    DIN 51 524/3 (HVLP)
    AFNOR HF E 48 603 HV
    DENISON HF-0, HF-1, HF-2
    ASTM D 6158 HV

Top hydraulic oils of very high viscosity index for transfer of power and motion in mobile hydraulic units and stationary hydraulic systems on different equipment. Owing to very high viscosity index, undisturbed unit operation is provided within normal and extreme environment temperatures, i.e. in conditions of significant temperature changes in the environment. They have excellent antiwear properties, high thermal and oxidation stability, high shear stability, efficient anticorrosion and antirust protection, excellent filtrability, fast water separation, absence of foaming and quick air separation.

Viscosity at 40 °C (mm²/s) 100
Viscosity at 100 ºC (mm²/s) 13.0
Flash point (°C) 220
Pour point (°C) -24
Packing 5L 10L 20L 180kg

Category: Hydraulic fluids

    ISO 11158 HV
    DIN 51 524/3 (HVLP)
    AFNOR HF E 48 603 HV
    DENISON HF-0, HF-1, HF-2
    ASTM D 6158 HV

Top hydraulic oils of very high viscosity index for transfer of power and motion in mobile hydraulic units and stationary hydraulic systems on different equipment. Owing to very high viscosity index, undisturbed unit operation is provided within normal and extreme environment temperatures, i.e. in conditions of significant temperature changes in the environment. They have excellent antiwear properties, high thermal and oxidation stability, high shear stability, efficient anticorrosion and antirust protection, excellent filtrability, fast water separation, absence of foaming and quick air separation.

Viscosity at 40 °C (mm²/s) 68
Viscosity at 100 ºC (mm²/s) 12.0
Flash point (°C) 210
Pour point (°C) -30
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO 11158 HV
    DIN 51 524/3 (HVLP)
    AFNOR HF E 48 603 HV
    DENISON HF-0, HF-1, HF-2
    ASTM D 6158 HV

Top hydraulic oils of very high viscosity index for transfer of power and motion in mobile hydraulic units and stationary hydraulic systems on different equipment. Owing to very high viscosity index, undisturbed unit operation is provided within normal and extreme environment temperatures, i.e. in conditions of significant temperature changes in the environment. They have excellent antiwear properties, high thermal and oxidation stability, high shear stability, efficient anticorrosion and antirust protection, excellent filtrability, fast water separation, absence of foaming and quick air separation.

Viscosity at 40 °C (mm²/s) 46
Viscosity at 100 ºC (mm²/s) 9
Flash point (°C) 205
Pour point (°C) -33
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO 11158 HV
    DIN 51 524/3 (HVLP)
    AFNOR HF E 48 603 HV
    DENISON HF-0, HF-1, HF-2
    ASTM D 6158 HV

Top hydraulic oils of very high viscosity index for transfer of power and motion in mobile hydraulic units and stationary hydraulic systems on different equipment. Owing to very high viscosity index, undisturbed unit operation is provided within normal and extreme environment temperatures, i.e. in conditions of significant temperature changes in the environment. They have excellent antiwear properties, high thermal and oxidation stability, high shear stability, efficient anticorrosion and antirust protection, excellent filtrability, fast water separation, absence of foaming and quick air separation.

Viscosity at 40 °C (mm²/s) 32
Viscosity at 100 ºC (mm²/s) 6.5
Flash point (°C) 185
Pour point (°C) -36
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO 11158 HV
    DIN 51 524/3 (HVLP)
    AFNOR HF E 48 603 HV
    DENISON HF-0, HF-1, HF-2
    ASTM D 6158 HV

Top hydraulic oils of very high viscosity index for transfer of power and motion in mobile hydraulic units and stationary hydraulic systems on different equipment. Owing to very high viscosity index, undisturbed unit operation is provided within normal and extreme environment temperatures, i.e. in conditions of significant temperature changes in the environment. They have excellent antiwear properties, high thermal and oxidation stability, high shear stability, efficient anticorrosion and antirust protection, excellent filtrability, fast water separation, absence of foaming and quick air separation.

Viscosity at 40 °C (mm²/s) 22
Viscosity at 100 ºC (mm²/s) 5.0
Flash point (°C) 175
Pour point (°C) -39
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO 11158 HV
    DIN 51 524/3 (HVLP)
    AFNOR HF E 48 603 HV
    DENISON HF-0, HF-1, HF-2
    ASTM D 6158 HV

Top hydraulic oils of very high viscosity index for transfer of power and motion in mobile hydraulic units and stationary hydraulic systems on different equipment. Owing to very high viscosity index, undisturbed unit operation is provided within normal and extreme environment temperatures, i.e. in conditions of significant temperature changes in the environment. They have excellent antiwear properties, high thermal and oxidation stability, high shear stability, efficient anticorrosion and antirust protection, excellent filtrability, fast water separation, absence of foaming and quick air separation.

Viscosity at 40 °C (mm²/s) 15
Viscosity at 100 ºC (mm²/s) 4.0
Flash point (°C) 170
Pour point (°C) -42
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO 11 158 HM
    DIN 51 524/2 (HLP)
    DENISON HF-0
    CINNCINATI MACHINE 
    P-68-P-70/P-69
    EATON VICKERS 35VQ-25

FAMHIDO HD PLUS is hydraulic clean technology oil formulated with new generation additives to ensure durability during operation and to maintain cleanliness and prevent the formation of deposits.
FAMHIDO HD PLUS is oil that is used as hydraulic fluids for the transfer of power and motion in all types of hydraulic systems at normal operating temperatures, as well as for the lubrication of bearings, gears and other components in various circulation systems.

Density at 15°C (g/cm³) 0.89
Kinematic viscosity at 40°C (mm²/s) 150
Kinematic viscosity at 100°C (mm²/s) 15.0
Viscosity index 100
Flash point (°C) 240
Packing  

Category: Hydraulic fluids

    ISO 11 158 HM
    DIN 51 524/2 (HLP)
    DENISON HF-0
    CINNCINATI MACHINE 
    P-68-P-70/P-69
    EATON VICKERS 35VQ-25

FAMHIDO HD PLUS is hydraulic clean technology oil formulated with new generation additives to ensure durability during operation and to maintain cleanliness and prevent the formation of deposits.
FAMHIDO HD PLUS is oil that is used as hydraulic fluids for the transfer of power and motion in all types of hydraulic systems at normal operating temperatures, as well as for the lubrication of bearings, gears and other components in various circulation systems.

Density at 15°C (g/cm³) 0.89
Kinematic viscosity at 40°C (mm²/s) 100
Kinematic viscosity at 100°C (mm²/s) 11.4
Viscosity index 100
Flash point (°C) 235
Packing  

 

Category: Hydraulic fluids

    ISO 11 158 HM
    DIN 51 524/2 (HLP)
    DENISON HF-0
    CINNCINATI MACHINE 
    P-68-P-70/P-69
    EATON VICKERS 35VQ-25

FAMHIDO HD PLUS is hydraulic clean technology oil formulated with new generation additives to ensure durability during operation and to maintain cleanliness and prevent the formation of deposits.
FAMHIDO HD PLUS is oil that is used as hydraulic fluids for the transfer of power and motion in all types of hydraulic systems at normal operating temperatures, as well as for the lubrication of bearings, gears and other components in various circulation systems.

Density at 15°C (g/cm³) 0.89
Kinematic viscosity at 40°C (mm²/s) 68
Kinematic viscosity at 100°C (mm²/s) 8.8
Viscosity index 102
Flash point (°C) 230
Packing  

 

Category: Hydraulic fluids

    ISO 11 158 HM
    DIN 51 524/2 (HLP)
    DENISON HF-0
    CINNCINATI MACHINE 
    P-68-P-70/P-69
    EATON VICKERS 35VQ-25

FAMHIDO HD PLUS is hydraulic clean technology oil formulated with new generation additives to ensure durability during operation and to maintain cleanliness and prevent the formation of deposits.
FAMHIDO HD PLUS is oil that is used as hydraulic fluids for the transfer of power and motion in all types of hydraulic systems at normal operating temperatures, as well as for the lubrication of bearings, gears and other components in various circulation systems.

Density at 15°C (g/cm³) 0.88
Kinematic viscosity at 40°C (mm²/s) 46
Kinematic viscosity at 100°C (mm²/s) 7.0
Viscosity index 109
Flash point (°C) 228
Packing  

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP)

Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 46
Viscosity at 100 °C (mm²/s) 7.0
Flash point (°C) 210
Pour point (°C) -24
Packing 10L 20L 60L 205L

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP)

Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 46
Viscosity at 100 °C (mm²/s) 7.0
Flash point (°C) 210
Pour point (°C) -24
Packing 10L 20L 60L 205L

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 46
Viscosity at 100 ºC (mm²/s) 7.0
Flash point (°C) 210
Pour point (°C) -21
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 320
Viscosity at 100 ºC (mm²/s) 24.0
Flash point (°C) 235
Pour point (°C) -18
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 220
Viscosity at 100 ºC (mm²/s) 19.0
Flash point (°C) 230
Pour point (°C) -21
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 150
Viscosity at 100 ºC (mm²/s) 14.5
Flash point (°C) 225
Pour point (°C) -21
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 100
Viscosity at 100 ºC (mm²/s) 11.0
Flash point (°C) 220
Pour point (°C) -21
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 68
Viscosity at 100 ºC (mm²/s) 9.0
Flash point (°C) 220
Pour point (°C) -21
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 46
Viscosity at 100 ºC (mm²/s) 7.0
Flash point (°C) 210
Pour point (°C) -24
Packing 5L 10L 20L 60L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 32
Viscosity at 100 ºC (mm²/s) 5.5
Flash point (°C) 200
Pour point (°C) -27
Packing 5L 10L 20L 180kg

 

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 22
Viscosity at 100 ºC (mm²/s) 4.3
Flash point (°C) 190
Pour point (°C) -27
Packing 5L 10L 20L 180kg

Category: Hydraulic fluids

    ISO L-HM; ISO 11158 HM
    DIN 51 524/2 (HLP); AFNOR NF E 48 603 HM
    ASTM D 6158 HM; DENISON HF-1, HF-2
    EATON VICKERS I-286-S
    EATON VICKERS M-2950-S; US STEEL

Hydraulic fluids - Mineral base hydraulic oils have anti wear and anticorrosion additives. They are applied as power and motion transfer fluids in all hydraulic systems in normal operating temperatures. They lubricate movable elements: wing, axial, piston and gear pumps. They do not have negative impact on parts made of non-ferrous metals, they do not destroy, dissolve nor swell usual sealing materials of rubber and plastics. They are applied also for the lubrication of small and lightly loaded closed toothed gearing.

Viscosity at 40 °C (mm²/s) 15
Viscosity at 100 ºC (mm²/s) 3.5
Flash point (°C) 180
Pour point (°C) -33
Packing 5L 10L 20L 180kg