Category: Turbine oils

    ISO TSA/TGA
    ISO 6743-5
    ISO 8068
    DIN 51515-1 L-TD
    DIN 51515-2 L-TG
    BS 489
    GEK 32568 A/C
    US Steal 120/125

FAM Turbolet PLUS turbine oils are made from high quality hydrocracked base oils with increased oxidation stability, with additives against wear and corrosion inhibitors. It does not contain additives based on zinc and have a lower tendency to form deposits. They have outstanding features allocations of water and air as well as low foaming tendency.

Viscosity at 40 °C (mm²/s) 32
Viscosity at 100 ºC (mm²/s) 5.9
Flash point (°C) 240
Pour point (°C) -18
Packing 180kg

 

Category: Turbine oils

    ISO TSA/TGA
    ISO 6743-5
    ISO 8068;
    DIN 51515/1
     BS 489GEK 32568 A/C
     US Steal 120

Turbine oils are produced from highly refined oils of mineral base, with increased oxidation stability, with antiwear additives and corrosion inhibitors. They have extraordinary properties of water and air separation as well as low foaming tendency. Turbine oils are intended for lubrication and cooling of steam, gas and water turbine bearings. Basic functions of turbine oil are lubrication and cooling of turbine bearings and gear transmissions as well as sealing with the aim of providing reliable operation of control and regulatory system.

Viscosity at 40 °C (mm²/s) 68
Viscosity at 100 ºC (mm²/s) 8.7
Flash point (°C) 225
Pour point (°C) -12
Packing 180kg

 

Category: Turbine oils

    ISO TSA/TGA
    ISO 6743-5
    ISO 8068;
    DIN 51515/1
    BS 489GEK 32568 A/C
    US Steal 120

Turbine oils are produced from highly refined oils of mineral base, with increased oxidation stability, with antiwear additives and corrosion inhibitors. They have extraordinary properties of water and air separation as well as low foaming tendency. Turbine oils are intended for lubrication and cooling of steam, gas and water turbine bearings. Basic functions of turbine oil are lubrication and cooling of turbine bearings and gear transmissions as well as sealing with the aim of providing reliable operation of control and regulatory system.

Viscosity at 40 °C (mm²/s) 46
Viscosity at 100 ºC (mm²/s) 6.8
Flash point (°C) 215
Pour point (°C) -12
Packing 180kg

 

Category: Turbine oils

    ISO TSA/TGA
    ISO 6743-5
    ISO 8068;
    DIN 51515/1
    BS 489GEK 32568 A/C
    US Steal 120

Turbine oils are produced from highly refined oils of mineral base, with increased oxidation stability, with antiwear additives and corrosion inhibitors. They have extraordinary properties of water and air separation as well as low foaming tendency. Turbine oils are intended for lubrication and cooling of steam, gas and water turbine bearings. Basic functions of turbine oil are lubrication and cooling of turbine bearings and gear transmissions as well as sealing with the aim of providing reliable operation of control and regulatory system.

Viscosity at 40 °C (mm²/s) 32
Viscosity at 100 ºC (mm²/s) 5.5
Flash point (°C) 205
Pour point (°C) -12
Packing 180kg