Category: Heat transfer oils

    ISO L-QA/QC
    DIN 51 522

FAMTERMOL is used as the medium for heat transmission in the heating systems in industry, production of rubber and plastics, asphalt bases, chemical, pharmaceutical and textile industry, drying-chambers and other industries. The volume of thermal oil at the temperature of 300°C is around 20% bigger than at room temperature. Oil quantity in heating vessels should be adjusted to this condition.

Viscosity at 40 °C (mm²/s) 100
Viscosity at 100 ºC (mm²/s) 10.7
Flash point (°C) 240
Pour point (°C) -12
Packing 20L 180kg

 

Category: Heat transfer oils

    ISO L-QA/QC
    DIN 51 522

FAMTERMOL is used as the medium for heat transmission in the heating systems in industry, production of rubber and plastics, asphalt bases, chemical, pharmaceutical and textile industry, drying-chambers and other industries. The volume of thermal oil at the temperature of 300°C is around 20% bigger than at room temperature. Oil quantity in heating vessels should be adjusted to this condition.

Viscosity at 40 °C (mm²/s) 46
Viscosity at 100 ºC (mm²/s) 6.7
Flash point (°C) 230
Pour point (°C) -15
Packing 20L 180kg

 

Category: Heat transfer oils

    ISO L-QA/QC
    DIN 51 522

FAMTERMOL is used as the medium for heat transmission in the heating systems in industry, production of rubber and plastics, asphalt bases, chemical, pharmaceutical and textile industry, drying-chambers and other industries. The volume of thermal oil at the temperature of 300°C is around 20% bigger than at room temperature. Oil quantity in heating vessels should be adjusted to this condition.

Viscosity at 40 °C (mm²/s) 32
Viscosity at 100 ºC (mm²/s) 5.6
Flash point (°C) 210
Pour point (°C) -15
Packing 20L 180kg