Category: Special lubricants for manual tool reducers
ISO L-XCCEB 0
DIN 51 502:KP 0K-30
FAM IS 01 402
Lubricating grease has special application for the lubrication of bearings and reducer gearings on manual electric grinders, saws and drills.
Temperature interval of application: -30°C to +120°C.
| Base | Li-soap, mineral oil |
| Consistency NLGI | 0 |
| Dropping point (°C) | min 175 |
| Weld load N | min 8000 |
| Packing | 0.8kg |
Category: Special lubricants for manual tool reducers
ISO L-XCDEB 000
ISO L-CKT
DIN 51 502:KPF 000N -30
Lubricating grease specially intended for the lubrication of reducer transmisions, bearings and sliding surfaces on manual vibratory drills, impact hammers and grinders. They are also recommended for central lubrication.
Temperature interval of application: -30°C to +140°C.
| Base | Li-soap, mineral oil, solid additives |
| Consistency NLGI | 000 |
| Dropping point (°C) | min 150 |
| Weld load N | min 5000 |
| Packing | 0.8 kg |
Category: Special lubricants for manual tool reducers
ISO L-XCDEB 00
ISO L-CKT
DIN 51502:KPF 00N-30
Lubricating grease specially intended for the lubrication of reducer transmisions, bearings and sliding surfaces on manual vibratory drills, impact hammers and grinders. They are also recommended for central lubrication.
Temperature interval of application: -30°C to +140°C.
| Base | Li-soap, mineral oil, solid additives |
| Consistency NLGI | 00 |
| Dropping point (°C) | min 160 |
| Weld load N | min 5000 |
| Packing | 0.8 kg |
Category: Special lubricants for manual tool reducers
ISO L-XCDEB 0
ISO L-CKT
DIN 51 502:KPF 0N-30
Lubricating grease specially intended for the lubrication of reducer transmisions, bearings and sliding surfaces on manual vibratory drills, impact hammers and grinders. They are also recommended for central lubrication.
Temperature interval of application: -30°C to +140°C.
| Base | Li-soap, mineral oil, solid additives |
| Consistency NLGI | 0 |
| Dropping point (°C) | min 160 |
| Weld load N | min 5000 |
| Packing | 0.8kg |
