FAMALPLEX 2MS

Details
Published: Monday, 28 March 2016 19:56
Written by Bodal

Category: Aluminum complex EP lubricating greases

    ISO L-XCDIB 2
    DIN 51 502:KP 2N-30

It is applied for the lubrication of roller and sliding bearings and other machine assembly blocks in conditions of medium speeds, high loads and elevated operating temperatures in significant influence of wet atmosphere and water washout effect.

Temperature interval of application: -30°C to +150°C.

Base Al-complex soap, mineral oil, solid lubricants
Consistency NLGI 2
Dropping point (°C) min 230
Weld load N min 6000
Packing 20kg 180kg

 

FAMALPLEX 00 EP

Details
Published: Monday, 28 March 2016 19:55
Written by Bodal

Category: Aluminum complex EP lubricating greases

    ISO L-XCDIB 00
    DIN 51 502:KP 00N-30

It is applied for the lubrication of roller and sliding bearings and other machine assembly blocks in conditions of medium speeds, moderate loads and increased operating temperatures and significant influence of wet atmosphere. It is particularly suitable for the lubrication of the equipment in steel mills, hot rolling mills, on the equipment for continuous casting and other equipment where there is significant influence of increased loads, temperature and rinsing effect of water. Suitable for central lubrication.

Temperature interval of application: -30°C to +150°C.

Base Al-complex soap, mineral oil
Consistency NLGI 00
Dropping point (°C) min 220
Weld load N min 3150
Packing 20kg 180kg

 

FAMALPLEX 0 EP

Details
Published: Monday, 28 March 2016 19:53
Written by Bodal

Category: Aluminum complex EP lubricating greases

    ISO L-XCDIB 0
    DIN 51 502:KP 0N-30

It is applied for the lubrication of roller and sliding bearings and other machine assembly blocks in conditions of medium speeds, moderate loads and increased operating temperatures and significant influence of wet atmosphere. It is particularly suitable for the lubrication of the equipment in steel mills, hot rolling mills, on the equipment for continuous casting and other equipment where there is significant influence of increased loads, temperature and rinsing effect of water. Suitable for central lubrication.

Temperature interval of application: -30°C to +150°C.

Base Al-complex soap, mineral oil
Consistency NLGI 0
Dropping point (°C) min 220
Weld load N min 3150
Packing 20kg 180kg

 

FAMALPLEX 1 EP

Details
Published: Monday, 28 March 2016 19:52
Written by Bodal

Category: Aluminum complex EP lubricating greases

    ISO L-XCDIB 1
    DIN 51 502:KP 1N-30

It is applied for the lubrication of roller and sliding bearings and other machine assembly blocks in conditions of medium speeds, moderate loads and increased operating temperatures and significant influence of wet atmosphere. It is particularly suitable for the lubrication of the equipment in steel mills, hot rolling mills, on the equipment for continuous casting and other equipment where there is significant influence of increased loads, temperature and rinsing effect of water.

Temperature interval of application: -30°C to +150°C.

Base Al-complex soap, mineral oil
Consistency NLGI 1
Dropping point (°C) min 230
Weld load N min 3150
Packing 20kg 180kg

 

FAMALPLEX 2 EP

Details
Published: Monday, 28 March 2016 19:51
Written by Bodal

Category: Aluminum complex EP lubricating greases

    ISO L-XCDIB 2
    DIN 51 502:KP 2N-30

It is applied for the lubrication of roller and sliding bearings and other machine assembly blocks in conditions of medium speeds, moderate loads and increased operating temperatures significant influence of wet atmosphere. It is particularly suitable for the lubrication of the equipment in steel mills, hot rolling mills, on the equipment for continuous casting and other equipment where there is significant influence of increased loads, temperature and rinsing effect of water.

Temperature interval of application: -30°C to +150°C.

Base Al-complex soap, mineral oil
Consistency NLGI 2
Dropping point (°C) min 230
Weld load N min 4000
Packing 20kg 180kg

 

FAMALPLEX 3 EP

Details
Published: Monday, 28 March 2016 19:49
Written by Bodal

Category: Aluminum complex EP lubricating greases

    ISO L-XCDIB 3
    DIN 51 502:KP 3N-30

It is applied for the lubrication of roller and sliding bearings and other machine assembly blocks in conditions of medium speeds, moderate loads and increased operating temperatures and significant influence of wet atmosphere. It is particularly suitable for the lubrication of the equipment in steel mills, hot rolling mills, on the equipment for continuous casting and other equipment where there is significant influence of increased loads, temperature and rinsing effect of water.

Temperature interval of application: -30°C to +150°C.

Base Al-complex soap, mineral oil
Consistency NLGI 3
Dropping point (°C) min 230
Weld load N min 4000
Packing 20kg 180kg