FOR PD 000

Details
Published: Monday, 28 March 2016 20:15
Written by Bodal

Category: Special lubricants for long-term lubrication

    ISO L-XDDEB 000
    DIN 51 502:KP 000N -40

Lubricating grease for life lubrication of roller and sliding bearings where change and refilling of lubricant is not foreseen by their construction. It is particularly suitable for long-lasting lubrication of electric motor bearings. Good lubrication effects are achieved in bearings with max. number of revolutions from n =15 000 r/min and for max. value of Dxn =1 600 000. It is used for the lubrication of low-speed gear reducer gearings as well as for the lubrication in central systems with long tubing.

Temperature interval of application: - 40°C to +140°C.

Base Li-soap, mineral oil
Consistency NLGI 000
Dropping point (°C) min 150
Weld load N min 2500
Packing 0.8 kg 20kg 180kg

 

FOR PD 00

Details
Published: Monday, 28 March 2016 20:14
Written by Bodal

Category: Special lubricants for long-term lubrication

    ISO L-XDDEB 00
    DIN 51 502:KP 00N-40

Lubricating grease for life lubrication of roller and sliding bearings where change and refilling of lubricant is not foreseen by their construction. It is particularly suitable for long-lasting lubrication of electric motor bearings. Good lubrication effects are achieved in bearings with max. number of revolutions from n =15 000 r/min and for max. value of Dxn =1 600 000. It is used for the lubrication of low-speed gear reducer gearings as well as for the lubrication in central systems with long tubing.

Temperature interval of application: - 40°C to +140°C.

Base Li-soap, mineral oil
Consistency NLGI 00
Dropping point (°C) min 150
Weld load N min 2500
Packing 0.8 kg 20kg 180kg

 

FOR PD 0

Details
Published: Monday, 28 March 2016 20:13
Written by Bodal

Category: Special lubricants for long-term lubrication

    ISO L-XDDEB 0
    DIN 51 502:KP 0N-40

Lubricating grease for life lubrication of roller and sliding bearings where change and refilling of lubricant is not foreseen by their construction. It is particularly suitable for long-lasting lubrication of electric motor bearings. Good lubrication effects are achieved in bearings with max. number of revolutions from n =15 000 r/min and for max. value of Dxn =1 600 000. It is used for the lubrication of low-speed gear reducer gearings as well as for the lubrication in central systems with long tubing.

Temperature interval of application: - 40°C to +140°C.

Base Li-soap, mineral oil
Consistency NLGI 0
Dropping point (°C) min 160
Weld load N min 2500
Packing 0.8 kg 20kg 180kg

 

FOR PD 1

Details
Published: Monday, 28 March 2016 20:11
Written by Bodal

Category: Special lubricants for long-term lubrication

    ISO L-XDDHB 1
    DIN 51 502:KP 1N-40

Lubricating grease for life lubrication of roller and sliding bearings where change and refilling of lubricant is not foreseen by their construction. It is particularly suitable for long-lasting lubrication of electric motor bearings. Good lubrication effects are achieved in bearings with max. number of revolutions from n =15 000 r/min and for max. value of Dxn =1 600 000.

Temperature interval of application: - 40°C to +140°C.

Base Li-soap, mineral oil
Consistency NLGI 1
Dropping point (°C) min 180
Weld load N min 3150
Packing 0.8 kg 20kg 180kg

 

FOR PD 2

Details
Published: Monday, 28 March 2016 20:10
Written by Bodal

Category: Special lubricants for long-term lubrication

    ISO L-XDDHB 2
    DIN 51 502:KP 2N-40

Lubricating grease for life lubrication of roller and sliding bearings where change and refilling of lubricant is not foreseen by their construction. It is particularly suitable for long-lasting lubrication of electric motor bearings. Good lubrication effects are achieved in bearings with max. number of revolutions from n =15 000 r/min and for max. value of Dxn =1 600 000.

Temperature interval of application: - 40°C to +140°C.

Base Li-soap, mineral oil
Consistency NLGI 2
Dropping point (°C) min 190
Weld load N min 3150
Packing 0.8 kg 20kg 180kg

 

FOR LPD 1

Details
Published: Monday, 28 March 2016 20:09
Written by Bodal

Category: Special lubricants for long-term lubrication

    ISO L-XCCHB 1
    DIN 51 502:KP 1K-30

Lubricating grease for long-term lubrication of roller and sliding bearings, joints and other machine assembly blocks in difficult and unfavourable conditions such as: high and impact loads, vibrations, elevated operating temperatures and moisture influence. Good lubrication effects are achieved in bearings with number of revolutions from n = 3000 r/min and for value of Dxn = 600 000. Period of lubricant change in the lubrication of the automobile wheels is over 100 000 kilometers.

Temperature interval of application: - 30°C to +130°C.

Base Li-soap, mineral oil
Consistency NLGI 1
Dropping point (°C) min 180
Weld load N min 3150
Packing 20kg 180kg

 

FOR LPD 2

Details
Published: Monday, 28 March 2016 20:08
Written by Bodal

Category: Special lubricants for long-term lubrication

    ISO L-XCCHB 2
    DIN 51502:KP 2K-30

Lithium lubricating grease based on EP- and additive for long-term lubrication. It is primarily applied for long-term lubrication of motor vehicle wheel bearings. Good lubrication effects are achieved in bearings with number of revolutions from n = 3000 r/min and for value of Dxn = 600 000. Period of lubricant change in the lubrication of the automobile wheels is over 100 000 kilometers. It is also applied for the lubrication of other lubrication points on automobile lower body, and for agricultural and construction mechanization. It is elastomer - compatible.

Temperature interval of application: - 30°C to +130°C.

Base Li-soap, mineral oil
Consistency NLGI 2
Dropping point (°C) min 185
Weld load N min 3150
Packing 0.4kg 0.8 kg 4kg 20kg 180kg eurocartridge 0,4kg

 

FOR LPD 2 / EP

Details
Published: Monday, 28 March 2016 20:05
Written by Bodal

Category: Special lubricants for long-term lubrication

    ISO L-XCCHB 2
    DIN 51502:KP 2 K-30

It is applied for long-lasting lubrication of sliding bearings, joints and other machine assembly blocks in difficult and unfavourable conditions such as high and impact loads, vibrations, elevated operating temperatures and moisture influence.

Temperature interval of application: - 30°C to +130°C.

Base Li-soap, mineral oil
Consistency NLGI 2
Dropping point (°C) min 190
Weld load N min 3150
Packing 20kg 180kg