Category: Environment-friendly lubricating greases
ISO L-XCCHA 2
DIN 51 502:K 2K -30
It is applied for the lubrication of lubricating assembly blocks in conditions of moderate loads, vibrations, presence of contaminants.
Temperature interval of application: - 30°C to + 110°C.
| Base | Li-soap, mineral oil |
| Consistency NLGI | 2 |
| Dropping point (ºC) | min 180 |
| Weld load N | min 2000 |
| Packing | 4kg 20kg 180kg |
Category: Environment-friendly lubricating greases
ISO L-XCCHB 1
DIN 51 502:KP 1K -30
It is applied for the lubrication of bearings in conditions of increased loads, higher number of revolutions and lower operating temperatures up to -30°C. It is suitable for the lubrication of bearings and other machine assembly blocks in conditions of significantly wet environment in hydroelectric power plants, in paper industry, fruit and vegetables processing industry, chemical, petrochemical, textile and other industries.
Temperature interval of application: from -30°C to +110°C.
| Base | Li-soap, mineral oil |
| Consistency NLGI | 1 |
| Dropping point (ºC) | min 180 |
| Weld load N | min 2500 |
| Packing | 180kg |
Category: Environment-friendly lubricating greases
ISO L-X CCHB 2
DIN 51 502:KP 2K -30
It is applied for the lubrication of bearings in conditions of increased loads, higher number of revolutions and lower operating temperatures up to -30°C. It is suitable for the lubrication of bearings and other machine assembly blocks in conditions of significantly wet environment in hydroelectric power plants, in paper industry, fruit and vegetables processing industry, chemical, petrochemical, textile and other industries.
Temperature interval of application: from -30°C to +110°C.
| Base | Li-soap, mineral oil |
| Consistency NLGI | 2 |
| Dropping point (ºC) | min 185 |
| Weld load N | min 2500 |
| Packing | 0.8kg 4kg 20kg 180kg |
Category: Environment-friendly lubricating greases
ISO L-XCCHB 3
DIN 51 502:KP 3K -30
It is applied for the lubrication of bearings in conditions of increased loads, higher number of revolutions and lower operating temperatures up to -30°C. It is suitable for the lubrication of bearings and other machine assembly blocks in conditions of significantly wet environment in hydroelectric power plants, in paper industry, fruit and vegetables processing industry, chemical, petrochemical, textile and other industries.
Temperature interval of application: from -30°C to +110°C.
| Base | Li-soap, mineral oil |
| Consistency NLGI | 3 |
| Dropping point (ºC) | min 190 |
| Weld load N | min 2500 |
| Packing | 180kg |
Category: Environment-friendly lubricating greases
ISO L-XCCHB 1
DIN 51 502:KP 1K -30
Special application in hydroelectric power plants, for the lubrication of bearings and other machine assembly blocks in conditions of significantly wet environment, high loads, higher number of revolutions as well as in conditions of lower operating temperatures.
Temperature interval of application: from -30°C to +110°C.
| Base | Li-soap, mineral oil |
| Consistency NLGI | 1 |
| Dropping point (ºC) | min 180 |
| Weld load N | min 2500 |
| Packing | 180kg |
Category: Environment-friendly lubricating greases
ISO L-XCCHB 2
DIN 51 502:KP 2K -30
Special application in hydroelectric power plants, for the lubrication of bearings and other machine assembly blocks in conditions of significantly wet environment, high loads, higher number of revolutions as well as in conditions of lower operating temperatures.
Temperature interval of application: from -30°C to +110°C.
| Base | Li-soap, mineral oil |
| Consistency NLGI | 2 |
| Dropping point (ºC) | min 185 |
| Weld load N | min 3150 |
| Packing | 20kg 180kg |
Category: Environment-friendly lubricating greases
ISO L-XCCHB 3
DIN 51 502:KP 3K -30
Special application in hydroelectric power plants, for the lubrication of bearings and other machine assembly blocks in conditions of significantly wet environment, high loads, higher number of revolutions as well as in conditions of lower operating temperatures.
Temperature interval of application: from -30°C to +110°C.
| Base | Li-soap, mineral oil |
| Consistency NLGI | 3 |
| Dropping point (ºC) | min 190 |
| Weld load N | min 3150 |
| Packing | 180kg |
