Category: Products for plastic deformation processing - copper drawing
ISO-L-MAB
FAM IS 03 812
Emulsifying oil creates stable milky emulsion with water. It is used for the lubrication in the operations of rough, medium fine and fine copper wire drawing in drawing speeds up to 30 m/s.
| Viscosity at 40 ºC (mm²/s) | 20 |
| Density at 20 ºC (g/mL) | 0.920 |
| pH-value (5% in water) | 8.5 |
| Packing | 180kg |
Category: Products for plastic deformation processing - copper drawing
ISO-L-MAB
FAM IS 03 812
Emulsifying oil creates stable milky emulsion with water. It is used for the lubrication in the operations of rough, medium, fine and super fine copper wire drawing. Bio resistance of the product provides long life of the emulsion.
| Viscosity at 40 ºC (mm²/s) | 30 |
| Density at 20 ºC (g/mL) | 0.950 |
| pH-value (4% in water) | 9.5 |
| Packing | 20kg 180kg |
Category: Products for plastic deformation processing - copper drawing
ISO-L-MAB
FAM IS 03 812
Emulsifying oil creates stable milky emulsion with water. It contains borate based corrosion inhibitor. It is used for cooling and lubrication in drawing of copper and other non-ferrous metals (pipes, bars, wires).
| Viscosity at 40 ºC (mm²/s) | 40 |
| Density at 20 ºC (g/mL) | 0.960 |
| pH-value (4% in water) | 9.3 |
| Packing | 20kg 180kg |
Category: Products for plastic deformation processing - copper drawing
ISO-L-MHB
FAM IS 04 153
Oils made of refined vegetable and paraffin oil. They are used for cooling and lubrication in copper tubes drawing. They provide manufacturing of shiny and smooth surfaces of the pipes with optimum tool wearing.
| Viscosity at 40 ºC (mm²/s) | 35 72 |
| Density at 20 ºC (g/mL) | 0.900 0.910 |
| Flash point (ºC) | min 180 |
| Packing | 180kg |
