PRES 30

Details
Published: Tuesday, 29 March 2016 09:21
Written by Bodal

Category: Products for plastic deformation processing - sheet metal deep drawing

    ISO-L-MHE
    SRPS B.H3.526
    FAM IS 04 101

Inactive oil of mineral base. It is used for the lubrication in the operation of deep drawing of sheets (d < 2 mm), made of steel, light and non-ferrous metals in manufacturing of simple configuration blanks in metalworking industry and in production of domestic technical appliances. It is removed from blanks by water solution of industrial washing products and it is also possible with organic solvents.

Viscosity at 40 ºC (mm²/s) 100
Density at 20 ºC (g/mL) 0.930
Flash point (ºC) min 190
Packing 180kg

PRES 509 EP; 509 SB

Details
Published: Tuesday, 29 March 2016 09:19
Written by Bodal

Category: Products for plastic deformation processing - sheet metal deep drawing

    ISO-L-MHE
    SRPS B.H3.526
    FAM IS 04 102

Inactive oils of mineral base. They are used for the lubrication in the operation of deep drawing of sheets (d > 2 mm), made of steel, light and non-ferrous metals in manufacturing of complex configuration blanks in automobile industry and in production of domestic technical appliances. They are used in concentrate form and they can also be used as pseudo-emulsion with water (water is gradually added to oil while stirring intensively).

Viscosity at 40 ºC (mm²/s) 170 140
Density at 20 ºC (g/mL) 0.950
Flash point (ºC) min 180
Packing 20kg 180kg

PRES 510

Details
Published: Tuesday, 29 March 2016 09:18
Written by Bodal

Category: Products for plastic deformation processing - sheet metal deep drawing

    ISO-L-MHE
    SRPS B.H3.526
    FAM IS 04 102

Inactive oil of mineral base. It is used for the lubrication in the operation of deep drawing of sheets (d > 2 mm), made of steel, light and non-ferrous metals in manufacturing of complex configuration blanks in automobile industry and in production of domestic technical appliances. It is used in concentrate form and it can also be used as pseudo-emulsion with water (water is gradually added to oil while stirring intensively).

Viscosity at 40 ºC (mm²/s) 140
Density at 20 ºC (g/mL) 0.920
Flash point (ºC) min 180
Packing 180kg

PRES 626

Details
Published: Tuesday, 29 March 2016 09:17
Written by Bodal

Category: Products for plastic deformation processing - sheet metal deep drawing

    ISO-L-MAI
    SRPS B.H3.526
    FAM IS 04 102

Lubricant made from animal fats. It is used for the lubrication in complex deep drawing operations and drawing down of steel sheets in metalworking industry and domestic technical appliances production industry. It is used in concentrate form and also as pseudo-emulsion with water in the ratio of 1:1 to 1:20 (water is gradually added into lubricant while stirring intensively). It is removed from blanks by water solution of industrial washing products and it is also possible with organic solvents.

Viscosity at 40 ºC (mm²/s) 330
Density at 20 ºC (g/mL) -
Flash point (ºC) min 180
Packing 180kg

FAMSOL DL

Details
Published: Tuesday, 29 March 2016 09:16
Written by Bodal

Category: Products for plastic deformation processing - sheet metal deep drawing

    ISO-L-MHB
    FAM IS 04 107

Product for cooling and lubrication of tools used for silicon sheet metal punching of electric engines and transformators. It spreads well on the surface and it has mild odour.

Vaporation rate at 20ºC (ether=1) 15
Density at 20 ºC (g/mL) 0.800
Flash point (ºC) min 18
Packing 17kg 160kg