Category: Anticorrosion oil
ISO-L-RD
FAM IS 07 001
Anticorrosion oil for temporary corrosion prevention in tubes, wires and small standardized equipment in indoor storage. It leaves thin, oily protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | 16.0 |
| Viscosity at 100 ºC (mm²/s) | - |
| Flash point (ºC) | >160 |
| Pour point (ºC) | <-27 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-RD
FAM IS 07 001
Anticorrosion oil for temporary corrosion prevention in tubes, wires and small standardized equipment in indoor storage. It leaves thin, oily protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | 18.0 |
| Viscosity at 100 ºC (mm²/s) | - |
| Flash point (ºC) | >160 |
| Pour point (ºC) | <-27 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-RD
FAM IS 07 001
Anticorrosion oil for temporary corrosion prevention on cold rolled steel sheets, profiles, strips and spare parts in indoor storage. It leaves thin, oily protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | 137.0 |
| Viscosity at 100 ºC (mm²/s) | - |
| Flash point (ºC) | >160 |
| Pour point (ºC) | <-6 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-RD
FAM IS 07 033
Anticorrosion oil primarily intended for corrosion prevention in cold rolled steel sheets and strips, elements and components of steel in indoor storage or during transportation in continental and overseas conditions. It leaves thin, oily, non-drying, protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | 30.0 |
| Viscosity at 100 ºC (mm²/s) | - |
| Flash point (ºC) | >160 |
| Pour point (ºC) | <-27 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-RDD
FAM IS 07 039
Anticorrosion oil intended for temporary corrosion prevention on cold rolled steel sheets and strips, elements and small parts. It leaves thin, oily, non-drying, protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | 34 |
| Viscosity at 100 ºC (mm²/s) | 4.5 |
| Flash point (ºC) | >180 |
| Pour point (ºC) | <-20 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-RD
ZASTAVA 56357/03
FAM IS 07 042
Anticorrosion oil intended for corrosion prevention on metal coverings and mechanical parts longer than 12 months in continental storage and transportation conditions. It leaves oily, non-drying, protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | 70 |
| Viscosity at 100 ºC (mm²/s) | 10 |
| Flash point (ºC) | >200 |
| Pour point (ºC) | <-12 |
| Packing | 180kg |
Category: Anticorrosion oil
ISO-L-RDD
MIL-C-22235
ASNO 2139
FAM IS 07 010
Anticorrosion oil used for the protection and lubrication of parts, assembly blocks and mechanisms. It is also applied for the protection of tools and of cold rolled sheets, strips and profiles in indoor storage. It displaces water and neutralizes fingerprints. It leaves oily, thin, highly adhesive, protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | >40.0 |
| Viscosity at 100 ºC (mm²/s) | >6,0 |
| Flash point (ºC) | >160 |
| Pour point (ºC) | <-35 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-RDD
SNO 2139
Anticorrosion oil used for protection and lubrication of tools, weapons and military equipment, after performed cleaning procedure, where it is necessary to provide mobility of elements in low temperatures. It can also be applied for the protection of all other parts, assembly blocks and devices where general, oily, protective film is requested for parts stored indoors. It leaves thin, oily, protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | >40,0 |
| Viscosity at 100 ºC (mm²/s) | >6,0 |
| Flash point (ºC) | >160 |
| Pour point (ºC) | <-35 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-RDD
FAM IS 07 040
Anticorrosion oil primarily intended for temporary corrosion prevention on processed and non-processed surfaces, semi-finished products and tools. It leaves adhesive, non-drying, oily film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | 50 |
| Viscosity at 100 ºC (mm²/s) | 7.0 |
| Flash point (ºC) | >160 |
| Pour point (ºC) | <9 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-RD
FAM IS 07 002
Water emulsifying anticorrosion oil used for the protection of small standardized goods and hardware with obligatory drying of the object.
| Viscosity at 40 °C (mm²/s) | 40.0 |
| Viscosity at 100 ºC (mm²/s) | - |
| Flash point (ºC) | >160 |
| Pour point (ºC) | -18 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
SO-L-REE
FAM IS 07 008
Anticorrosion product intended for protection of bearings and other products where oily-greasy film is required.
| Density at 20ºC | 0,847 |
| Flash point (ºC) | min 100 |
| Pour point (ºC) | -36 |
| Packing | 20kg 170kg |
Category: Anticorrosion oil
ISO -L-REE
FAM IS 07 008
Product is intended for inter-stage protection with the ability to displace water. It leaves ultra thin, oily film.
| Density at 20ºC | 0,847 |
| Flash point (ºC) | min 100 |
| Pour point (ºC) | -36 |
| Packing | 20kg 170kg |
Category: Anticorrosion oil
ISO-L-RC
FAM IS 07 026
Preserving lubricating oil intended for inter-stage parts protection where protective oil also performs lubrication of assembly blocks. It leaves thin, oily, protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | 22.0 |
| Viscosity at 100 ºC (mm²/s) | 4.0 |
| Flash point (ºC) | >170 |
| Pour point (ºC) | >-22 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-RDD
FAM IS 07 022
Low viscosity anticorrosion oil is applied for the corrosion protection of small parts packed in bulk such as: needles, thin wires, bearings and bearing elements and spare parts of finer proportions. It is applied also for the lubrication of precise parts and devices for measurement control. It leaves thin, oily, non-sticky, protective film on protected surfaces.
| Viscosity at 40 °C (mm²/s) | 8.0 |
| Viscosity at 100 ºC (mm²/s) | - |
| Flash point (ºC) | >123 |
| Pour point (ºC) | >-39 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-AY
FAM IS 07 041
Anticorrosion oil has good properties of lubricity and corrosion prevention. It is primarily intended for the lubrication and protection of railway switches. It leaves oily, non-drying protective film on metal parts. Oil viscosity is adjusted depending on the season (winter).
| Viscosity at 40 °C (mm²/s) | 39.0 |
| Viscosity at 100 ºC (mm²/s) | 6.0 |
| Flash point (ºC) | >180 |
| Pour point (ºC) | >-30 |
| Packing | 20kg 180kg |
Category: Anticorrosion oil
ISO-L-AY
FAM IS 07 041
Anticorrosion oil has good properties of lubricity and corrosion prevention. It is primarily intended for the lubrication and protection of railway switches. It leaves oily, non-drying protective film on metal parts. Oil viscosity is adjusted depending on the season (summer).
| Viscosity at 40 °C (mm²/s) | 75.0 |
| Viscosity at 100 ºC (mm²/s) | 9.0 |
| Flash point (ºC) | >200 |
| Pour point (ºC) | >-20 |
| Packing | 20kg 180kg |
