FAM AUTOGLAS ADITIV

Details
Published: Sunday, 27 March 2016 15:08
Written by Bodal

Category: Special products for motor vehicles

    FAM FSP 230731

Extremely strong, highly concentrated liquid for washing the windshield in the summer. Effectively and quickly removes dirt and debris from insects, oil, soot and other debris from the windshield. Do not damage the lacquer, paint, plastic and rubber parts of the windscreen and wipers. It has a pleasant smell. It does not contain ammonia. 300 ml of concentrate makes 2 liters of washer fluid.

Density at 20 ºC (g/mL) 1.05
pH value  8
Freezing point  (°C) -2
Effect on metal surfaces it does not have effect
Packing 0.3L

 

MOTOSTART spray

Details
Published: Sunday, 27 March 2016 15:01
Written by Bodal

Category: Special products for motor vehicles

    SRPS Z.M9.050

MOTOSTART spray is product for quick engine start. It is made on the basis of easily volatile and flammable components, solvents and propellant (propane-butane).

 

Appearance at 20 ºC clear
Density at 15 ºC (g/ml) 0.6950
Water content (%) no content
Packing 0.2L

 

FAM ADBLUE

Details
Published: Sunday, 27 March 2016 14:59
Written by Bodal

Category: Special products for motor vehicles

    DIN 70070
    ISO 22241

FAM ADBLUE is non-harmful synthetic solution. It is used as the agent for exhaust emissions reduction according to SCR (Selective Catalystic Reduction) technology in cargo vehicles with Euro 4 and Euro 5 diesel aggregates.

FAM ADBLUE can be applied in all cargo vehicles using SCR technology. Famous heavy duty vehicles manifacturers such as MAN, Scania, Mercedes - Benz, Iveco, Volvo, Renault and DAF have already decided to use this technology.

FAM AdBlue is put into special reservoir before catalytic converter and it is dosed independently into exhaust emissions system. It transforms harmful nitrogen oxides in the catalytic converter into nitrogen and water, which are natural component of air we breath. Consumption of FAM AdBlue is around 5% of diesel fuel consumption per 100 km.

FAM ADBLUE freezes at the temperature of -11°C and it decomposes at the temperatures higher than +25°C, therefore manipulation and storage must be performed at the temperature between -11°C and +25°C.

Urea content (%) 32.5
Refractory index 1.3828

 

Distilled water

Details
Published: Sunday, 27 March 2016 14:57
Written by Bodal

Category: Special products for motor vehicles

    FAM FSP 22160

It is used for filling and refilling of accumulators, in vehicle cooling systems for diluting the antifreeze concentrate, for steam irons etc.

Electric conductvity 25 ºC (μS/cm) ≤5
pH value 25 °C 5,0-7,5
Total water hardness (ºd) max 0,1
Packing 1L 20L 180kg

 

FAM AUTOGLAS SUPER KONCENTRAT

Details
Published: Sunday, 27 March 2016 14:55
Written by Bodal

Category: Special products for motor vehicles

    FAM FSP 207527

FAM AUTOGLAS SUPER KONCENTRAT is liquid based on alcohol and functional additives for windshield and headlights washing, as well as for washing of glass surfaces. It does not contain methyl alcohol.

Density at 15 °C (g/mL) 0.882
Effect on colored surfaces it does not have effect
Effect on rubbers and plastic materials it does not have effect

 

FAM AUTOGLAS L

Details
Published: Sunday, 27 March 2016 14:51
Written by Bodal

Category: Special products for motor vehicles

    FAM IS 06 741

FAM AUTOGLAS - L efficiently and quickly removes dirt and remanants of insects from windshield, in summer period. It has pleasant smell. It does not have effect on colour, rubber and plastics. It doesn not contain ammonia.

 

Density at 20 ºC (g/mL) 0.990
pH value 25 ºC 8.5-9.5
Flash point (ºC) -
Freezing point  (°C) -2
Packing 1L

 

FAM AUTOGLAS

Details
Published: Sunday, 27 March 2016 14:49
Written by Bodal

Category: Special products for motor vehicles

     FAM IS 06 741

FAM AUTOGLAS - is used for windshield washing in motor vehicle systems. In winter season, without dilution, it enables use up to -20°C. In spring and autumn season, it is diluted up to 1:1, and in summer season up to 1:10.

Density at 20 ºC (g/mL) 0.958
pH value 25 ºC 8-9
Flash point (ºC) 28
Freezing point  (°C) -20
Packing 1L

FAM ANTIFRIZ 40 long life (G12 / G12+)

Details
Published: Sunday, 27 March 2016 14:47
Written by Bodal

Category: Special products for motor vehicles

    SRPS H. Z2. 010, Tipe I, OAT;
    WW(TL 774E/D G12+/G12)
    COMMINS (IS/N 14)
    WARTSILA (32-9011) MB(325.3)
    VOLVO (014GS 17009)
    MTU (MTI 5048); MAN (324 SNF); KOMATSU (07.892)
    GM (GM 6277M); FORD (WSS-M97B44-D)
    ASTM D 3306/4656; ASTM D 4985; JIS K 2234; SHE J 1034

FAM ANTIFRIZ LONG LIFE s intended for the filling of closed and open cooling systems of the internal combustion engines. ANTIFRIZ 40 LONG LIFE (G12 / G12+) protects cooling system from corrosion up to 5 years.

Density at 20 ºC (g/mL) 1.06
Reserve alkalinity min 3
Freezing point (°C) do -38
Freezing point 1:1 antifreeze/ water (°C) -
Packing 1L 5L 210kg

 

FAM ANTIFRIZ 100 long life (G12 / G12+)

Details
Published: Sunday, 27 March 2016 14:46
Written by Bodal

Category: Special products for motor vehicles

    SRPS H. Z2. 010, Tip I, OAT; 
    WW(TL 774E/D G12+/G12)
    COMMINS (IS/N 14)
    WARTSILA (32-9011) MB(325.3)
    VOLVO (014GS 17009)
    MTU (MTI 5048); MAN (324 SNF); KOMATSU (07.892)
    GM (GM 6277M); FORD (WSS-M97B44-D)
    ASTM D 3306/4656; ASTM D 4985; JIS K 2234; SHE J 1034

FAM ANTIFRIZ LONG LIFE is intended for the filling of closed and open cooling systems of the internal combustion engines. ANTIFRIZ 100 LONG LIFE (G12 / G12+) - Antifreeze concentrate which is diluted up to the desired freezing point, prior to use. Durability within the system is up to 5 years.

Density at 20 ºC (g/mL) 1.12
Reserve alkalinity min 3
Freezing point (°C) -
Freezing point 1:1 antifreeze/ water (°C) -40
Packing 1L 4L 210kg

 

FAM ANTIFRIZ 100 UNIVERZAL

Details
Published: Sunday, 27 March 2016 14:43
Written by Bodal

Category: Special products for motor vehicles

    SRPS H. Z2. 010, tip I, conventional
    SAE J 1034
    BS 6580; ASTM D 3306
    AFNOR NFR-15-601

FAM ANTIFRIZ UNIVERZAL is intended for the filling of closed and open cooling systems of the internal combustion engines. FAM ANTIFRIZ 100 UNIVERZAL - Antifreeze concentrate which is diluted up to the desired freezing point, prior to use. It protects cooling system from corrosion for 2 years, it does not foam.

Density at 20 ºC (g/mL) 1.12
Reserve alkalinity min 10
Freezing point (ºC) -
Freezing point 1:1 antifreeze/water (ºC) -37
Packing 1L 4L 210kg

FAM ANTIFRIZ 40 UNIVERZAL

Details
Published: Sunday, 27 March 2016 14:41
Written by Bodal

Category: Special products for motor vehicles

    SRPS H. Z2. 010, tip III, conventional
    SAE J 1034
    BS 6580; ASTM D 3306
    AFNOR NFR-15-601

FAM ANTIFRIZ UNIVERZAL is intended for the filling of closed and open cooling systems of the internal combustion engines. FAM ANTIFRIZ 40 UNIVERZAL is applied in delivered form, without dilution. It protects cooling system from corrosion for 2 years, it does not foam.

Density at 20 ºC (g/mL) 1.08
Reserve alkalinity ≥8
Freezing point (°C) -38
Freezing point 1:1 antifreeze/ water (°C) -
Packing 1L 5L 210kg

FAM ANTIFRIZ 100

Details
Published: Sunday, 27 March 2016 14:39
Written by Bodal

Category: Special products for motor vehicles

    SRPS H. Z2. 010, Tip I, hybrid
    SAE J 1034; BS 6580; ASTM D 3306
    BMW N 600 69.0; MAN 324-NF
    Chrysler MS-7170,MS-9769; Opel -QL 130100
    Porsche/Audi /Skoda/Seat -TL 774-C

FAM ANTIFRIZ is intended for the filling of closed and open cooling systems of the internal combustion engines. FAM ANTIFRIZ 100 - Antifreeze concentrate which is diluted up to the desired freezing point, prior to use. It protects cooling system from corrosion for 3 years, it does not foam.

Density at 20 ºC (g/mL) 1.12
Reserve alkalinity ≥13
Freezing point (°C) -
Freezing point 1:1 antifreeze/ water (°C) -38
Packing 1L 4L 210kg

 

FAM ANTIFRIZ 40

Details
Published: Sunday, 27 March 2016 14:36
Written by Bodal

Category: Special products for motor vehicles

    SRPS H. Z2. 010, Tip III, hibridni
    SAE J 1034; BS 6580; ASTM D 3306
    BMW N 600 69.0; MAN 324-NF
    Chrysler MS-7170,MS-9769; Opel -QL 130100
    Porsche/Audi /Skoda/Seat -TL 774-C

FAM ANTIFRIZ is intended for the filling of closed and open cooling systems of the internal combustion engines. FAM ANTIFRIZ 40 is applied in delivered form, without dilution. Durability within the system is 3 years.

Density at 20 ºC (g/mL) 1.08
Reserve alkalinity ≥8
Freezing point (°C) -38
Freezing point 1:1 antifreeze/ water (°C) -
Packing 1L 5L 210g

FAM DIZEL 400

Details
Published: Sunday, 27 March 2016 14:32
Written by Bodal

Category: Special products for motor vehicles

    FAM FSP 144304

Diesel fuel additive prevents the appearance of paraffin crystals at low temperatures. By using this additive, the engine will have easier start and normal operation on temperatures up to -25°C.

 

Density at 15 °C (g/ml) 0.78
Viscosity at 20 °C (mm²/s) 3.0
Flash point (°C) 38
Pour point (°C) -45
Packing 0.25L 0.5L 1L 180kg

FAM EURO DIZEL 100

Details
Published: Sunday, 27 March 2016 14:20
Written by Bodal

Category: Special products for motor vehicles

FAM FSP 226610

Diesel fuel additive that prevents the appearance of paraffin crystals in low temperatures. By using this additive, easier motor start and normal operation in temperatures up to -30°C is enabled.

Density at 15°C 0.83
Kinematic viscosity at 20°C (mm²/s) 3.0
Flash point (°C) min 60
Pour point (°C) -18
Packing 0.1L 0.25L 0.5L 1L 180kg

FAM DIZEL PLUS

Details
Published: Sunday, 27 March 2016 14:18
Written by Bodal

Category: Special products for motor vehicles

FAM FSP 229121

FAM® DIZEL PLUS is phosphorus-free additive for diesel fuel with low sulfur content. 
The addition of this additive forms protective layer on the metal surfaces of fuel injection system which reduces friction and increases lubricity. The product does not react with the fuel and its components and is completely combustive.

 

Viscosity at 20 °C (mm²/s) max 3
Flash point (°C) min 70
Pour point (°C) max -18
Density at 15°C (g/ml) 0.83
Packing 0.1L 0.25L 1L 170kg

 

FAM ENGINE OIL ADDITIVE

Details
Published: Sunday, 27 March 2016 14:17
Written by Bodal

Category: Special products for motor vehicles

FAM® ENGINE OIL ADDITIVE is additive that extends the life of engine oil and the engine. By using multi-layered WS2 nano particles, friction and engine wear are reduced. It is suitable for all types of engines, gasoline and diesel engines. It is suitable for all types of oils - synthetic, semi-synthetic and mineral. Recommended treatment rate is 2-7%.

 

Viscosity at 40 °C (mm²/s) 110
Viscosity at 100 °C (mm²/s) -
Flash point (°C) 250
Density at 15 °C (g/ml) 1.00
Packing 0.1L 0.5L 1L 170kg